Replacement LCD Screen Display For LP156WFD-SPL1 15.6 inch FHD Touch Panel
iProGadgets OEM Repair Parts for LP156WFD-SPL1 15.6 inch FHD Touch Laptop Screen Replacement — Quick Answers
Quick answer: this is a brand-new 15.6 inch Full HD in-cell touch replacement LCD panel coded LP156WFD(SP)(L1), also written LP156WFD-SPL1 — 1920 x 1080 at 60 Hz on a 40-pin eDP connector, glossy front with no mounting brackets, the touch layer built into the panel cell and reporting over USB. Two things decide this order: the panel has to be the touch build, and it has to be Full HD. If you arrived here from a machine search, send us the code printed on the label of the screen you are removing and we will match it.
- Fit: The 15.6 inch Full HD touch panel coded LP156WFD-SPL1, written LP156WFD(SP)(L1) on the label and in the catalogue — the glossy in-cell touch screen on a 40-pin eDP connector
- Panel: a-Si TFT-LCD wide-viewing-angle panel (AH-IPS), in-cell capacitive touch built into the cell and reporting over USB, glare front with a 3H hard coating, no mounting brackets, 350.66 x 216.15 mm, AMD FreeSync capable
- Testing: every unit is double tested before shipping — display, touch and fitment
Technical Specifications
| Item | Detail |
|---|---|
| Panel code | LP156WFD-SPL1 — printed as LP156WFD(SP)(L1) on the label and in the catalogue. Both spellings are the same panel. Two records of this code disagree on the plug width and one adds a FreeSync line, so read the whole label string and send it to us |
| Screen size | 15.6 inches diagonal (39.6 cm), 16:9 |
| Resolution | 1920 x 1080 px (Full HD), 141 PPI |
| Refresh rate | 60 Hz, AMD FreeSync supported |
| Panel technology | a-Si TFT-LCD, an IPS-class wide-viewing-angle panel recorded as AH-IPS, normally black, transmissive, WLED edge-lit backlight with the driver on the panel board, 262K colours at 45% NTSC, eDP 1.2 with sDRRS and SSC |
| Touch | Yes — capacitive multi-touch, built into the panel cell. There is no separate digitizer glass plate to transfer from your old screen, so the touch layer arrives with the panel and works as soon as the machine is assembled. Test it before final assembly: a weak digitizer board or a damaged display cable is the usual cause of ghost touch, dead zones or inverted touch, so please check that cable and board rather than concluding the panel is faulty. On this panel the touch layer is in-cell, which means the sensor is formed inside the display cell itself rather than in a separate plate |
| Brightness | two records of this code disagree — 250 cd/m² in one and 300 cd/m² in the other. Treat 250 as the floor and expect a bright panel; a replacement screen may look slightly brighter or dimmer than the one it replaces, which is a production-batch difference, not a fault |
| Contrast ratio | 800:1 typical on the record that gives 250 cd/m², 700:1 on the one that gives 300 cd/m² — the two figures come from different measurement sets, so we print both rather than averaging them |
| Surface finish | Gloss, also written Glare (Haze 0%), with a 3H hard coating. One supplier catalogue describes this spare part as matte; every panel record quoted against this code prints a gloss front, so order on the understanding that this is the glossy screen. The anti-glare narrow-bezel Full HD sibling is a different part number |
| Signal interface | eDP, 40-pin connector about 25 mm across, 3.3 V. On this machine the one plug carries the display signal, the backlight supply, the dimming control and the USB touch signal together — which is why a standard 30-pin 15.6 inch panel cannot be connected here at all. Count the contacts on the flex of the screen you are removing before ordering |
| Connector position | Bottom right, viewed from the back of the panel |
| Outline dimensions | 350.66 mm wide x 216.15 to 216.69 mm high x 3.2 mm deep; active area 344.16 x 193.59 mm |
| Mounting | No brackets — this slim panel is held by adhesive, not screws. The bezel adhesive and the rear cover adhesive are part of what the factory spare covers, and we supply the panel on its own, so have fresh adhesive tape ready before you start |
| Production note | this code went into mass production in the third quarter of 2019 and is now marked discontinued by the panel records, which is why it is catalogued as an alternative rather than the primary code for this spare part. If you need an exact (SP)(L1) unit, tell us when you order and we will confirm what we can supply |
| Same spare part, other panel codes | B156HAK02.1 and NV156FHM-T01 V8.0 are quoted by suppliers as the panel inside the very same spare part as LP156WFD(SP)(L1). They agree on 15.6 inches, 1920 x 1080, a 40-pin eDP connector at the bottom right, a gloss front and no brackets. We do not promise which of them is in your machine; read the code off the label of the screen you are removing and send it to us |
| NOT the non-touch panel | L25334-001 is the same 15.6 inch Full HD panel WITHOUT touch, one digit away from L25333-001, and L47710-001 is the anti-glare narrow-bezel build without touch. A non-touch panel cannot be used in a touch machine: the touch layer lives inside the cell, so the screen would light up but nothing would respond to your finger |
| NOT the HD touch panel | L25330-001 is the glossy touch panel for the same series at a lower HD resolution, and L25331-001 / L25332-001 / L25335-001 / L25336-001 are the other anti-glare builds. All of them share the same 15.6 inch frame and the same 40-pin connector, so a photo alone will not separate them — a 1366 x 768 machine will not show a correct picture on a 1920 x 1080 panel, and the other way round |
| NOT a whole display assembly | This is the screen panel on its own — no display bezel, no rear cover, no hinges and no camera module. If you need the complete display assembly or the bezel, tell us before ordering |
| Condition | Brand-new, unassembled |
| Quality | iProGadgets OEM Quality |
Compatibility
| Device | Model numbers / part codes |
|---|---|
| Panel code covered — this listing | LP156WFD-SPL1, written LP156WFD(SP)(L1) on the label |
| Same spare part, other panel codes | B156HAK02.1 and NV156FHM-T01 V8.0, listed on their own as well as here |
| Other machines some suppliers name for this code — not promised | A few sellers cross-list this panel code to 15.6 inch machines from other makers, and one of those lists also carries part numbers from 11-inch notebooks that physically cannot take a 15.6 inch panel. That list is not reliable, so we do not repeat it as a fitment claim. Send us the label from your own machine and we will check it |
| Same panel family, listed by code | We also sell this panel family as separate panel-code entries — B156HAK02.2, B156HAK02.0, B156HAK02.3, B156HAK02.H and the LP156WFD-SPH / -SPK variants . They describe the same physical screen, so a search on any one code can turn up more than one result; send us the code from your label and we will confirm which one we are shipping |
| NOT the non-touch panel | L25334-001 (Full HD, no touch) and L47710-001 (anti-glare narrow bezel, no touch) do not fit a touch machine and are not interchangeable with this panel |
| NOT the HD panel | L25330-001, L25331-001, L25332-001, L25335-001 and L25336-001 are the other builds for this series on the same 40-pin connector — a different resolution, not a substitute |
Before We Ship — Please Send Us These 3 Details
Laptop, all-in-one and desktop PC screens can differ between revisions of the same model, so the listing alone cannot always tell us which panel is inside your machine. After you place the order we will contact you for the three items below — please send them so we can confirm the fitment and ship the correct, fully compatible screen straight away:
- A photo of your computer. A clear photo of the laptop itself, plus the model / service label on the bottom cover (or the model name shown in Settings → About).
- Touch or non-touch, resolution and refresh rate. Tell us whether your screen is a touch screen or a non-touch screen, its resolution, and its refresh rate in Hz. If you are not sure, just send the model number and we will check it for you.
- Photos of your old screen. Once the machine is opened, a full photo of the back of the old screen and a close-up of the label or barcode sticker on it. That label carries the exact panel part number, which removes any doubt about which screen you need.
We check your photos against our stock before dispatch. If something does not match, we will contact you first instead of sending a part that may not fit. Once your details are confirmed, we arrange shipment within 1 to 3 business days. Thank you for helping us get it right.
Installation Notes
- Clean the flex cable with alcohol before installation and confirm that it is well connected.
- Do not pull, tear or push on the flex cable, be careful during installation.
- Before installing the screen, please remove the battery in advance.
- Please tap the screen carefully, because the screen is too fragile to damage.
Quality Control
Strictly tested by the iProGadgets QC Team — every unit is double tested before shipping and ships in good working order. After receiving the part, please check the appearance and test it first: connect the part to the motherboard for a functional test before full installation, and only install once everything works. We are not responsible for any installation mistakes — if you are not experienced with screen replacement, have the part fitted by a professional repair shop.
Shipping
We ship worldwide. Orders are dispatched within 1 to 3 business days, and every package carries a tracking number you can follow on the order page. Delivery typically takes 7 to 10 days after dispatch.
Returns & Warranty
30-day returns on unused, uninstalled parts. The warranty is valid until installed — once a screen has been fitted, the return window no longer applies, which is why we ask you to test before installation.
FAQs
How do I check that LP156WFD(SP)(L1) is the screen I need?
Open the machine, lay the screen face down and read the barcode label on the back of the panel. This listing answers for LP156WFD(SP)(L1), which is the same panel as LP156WFD-SPL1, and it should be 1920 x 1080, 15.6 inches, a glossy front and a 40-pin connector at the bottom right, with no screw tabs anywhere on the frame. If the label carries a different number, or the panel you are removing is not Full HD, send us a photo of that label and we will tell you honestly which part you need instead of shipping the wrong screen.
Is LP156WFD(SP)(L1) the same as LP156WFD-SPL1?
Yes. The label and the catalogue use the bracketed spelling and the part search you typed probably used the hyphenated one — they are the same panel, so either spelling will bring you to the right screen. If you see the code printed as (SP)(L1) on your screen's label, this is the listing for it.
How bright is this screen, and is it matte or glossy?
It is the glossy screen, recorded as Glare with a 3H hard coating. On brightness the two records for this code disagree — one gives 250 cd/m², the other 300 cd/m² — so treat it as a bright panel and expect a slight difference against the screen it replaces rather than an identical match. That difference is normal between production batches and is not a fault.
Will the touch work straight away, and what if it does not?
Yes — the touch layer is built into the panel cell, so it arrives with the screen and no separate digitizer glass has to be transferred. Fit the panel, reconnect the display cable and test touch before you close the machine up. If touch misbehaves — ghost touches, dead strips, inverted response — the usual causes are the display cable not seated properly or a weakened digitizer board on the machine, so check those two first. Still faulty, and contact us: we test every unit before it ships and we will sort it out.
Questions about fit, shipping to your country, or bulk pricing? Email sales@iProGadget.com and we will confirm the exact part you need.
Frequently Asked Questions
Is this part compatible with my device?
This listing is for Replacement LCD Screen Display For LP156WFD-SPL1 15.6 inch FHD Touch Panel. It is built as a direct-fit replacement for the model named in the title. Match the model number in the title against your own device before ordering. If you are not sure which version you need, email sales@iProGadget.com and we will confirm the correct part for you.
What is the quality of these replacement parts?
We supply iProGadgets OEM Quality / Premium Compatible replacement parts. Every part is manufactured to OEM specifications, so the fit, finish and function match the original component it replaces, and each unit is individually tested before it leaves our warehouse.
Is the part tested before it is shipped?
Yes. Every part we sell is inspected before dispatch and tested wherever testing applies — screen assemblies are checked on the panel, the touch response and the connector. Orders are processed and shipped within 1-3 business days after payment is confirmed.
How long does shipping take?
Orders leave our warehouse within 1-3 business days. Express Shipping (DHL, UPS or FedEx) takes 5-8 working days and is normally used for parcels over 2 kg. Registered Air Post takes 10-20 working days and is normally used for parcels under 2 kg. Every order ships with a tracking number. Customs clearance can add extra time, especially during peak season.
Will I be charged import duties or customs fees?
Customs charges depend on your own country's import rules and its de minimis threshold, not on the seller. Some destinations apply no duty at all on lower-value parcels, and where duty or VAT does apply it is collected by your local post office or courier before delivery. We ship every order with complete and accurate commercial documents, which is what keeps a parcel moving through customs instead of sitting in it. If you would like to estimate the charges before you order, email us your country and we will point you to the right authority.
What is your return policy?
We offer a 30-day return policy, which means you can request a return within 30 days of receiving your item. To be eligible, the item must be unused, uninstalled and in the packaging it arrived in. Once a part has been fitted, bonded or used it cannot be returned, so please test the part before installation. To start a return, email sales@iProGadget.com.
What should I do if the part arrives damaged or faulty?
Inspect your order as soon as it arrives. If an item is defective, damaged or not what you ordered, contact us at sales@iProGadget.com straight away with photos or a short unboxing video, and we will arrange a replacement or a refund.
Do you provide repair guides or installation tutorials?
No. We are a supplier of replacement parts only. We are not a repair shop, and we do not provide repair guides, tutorials or step-by-step installation support. Every part we sell is intended to be installed by a professional technician at a qualified repair shop, which also gives the best result: a technician can transfer the small components, handle the adhesives and test the finished repair. Please do not attempt the installation yourself if you have no previous repair experience, as these assemblies are fragile and incorrect handling can damage them permanently. We sell parts only and do not accept responsibility for installation carried out by the customer. Our warranty covers the part itself and remains valid until the part is installed. If a problem appears after the repair, please take the device back to the repair shop that fitted the part so they can inspect the installation and test the device.
Still have a question about this part? Email us at sales@iProGadget.com and we will confirm compatibility, shipping time or return details for you.
