Replacement LCD Screen Display For B133XTN01.7 B133XTN01.5 13.3 inch HD Slim Panel
iProGadgets OEM Repair Parts for B133XTN01.7 B133XTN01.5 13.3 inch HD Slim Laptop Screen Replacement — Quick Answers
Quick answer: this is a brand-new 13.3 inch non-touch replacement LCD panel supplied against the codes B133XTN01.7 and B133XTN01.5 — 1366 x 768 HD at 60 Hz on a 30-pin eDP connector, 220 cd/m², matte anti-glare with 3H hard coating, double tested before shipping and covered by a 30-day return window on unused, uninstalled parts. It is the slim 306.3 x 195.2 mm panel with mounting holes along the top and bottom edges, and it is the same panel we already supply against the B133XTN01.6 and B133XTN01.3 codes. Please match the connector before you order. This code family also shipped in a 40-pin revision on a slightly different frame, and panel records describe both of the codes in this listing as 40-pin on some datasheets, so count the contacts on the plug of the screen you are removing. A 40-pin screen does not connect to a 30-pin cable. Send us the label code and a photo of the connector and we will confirm which panel we are shipping before dispatch.
- Fit: The 13.3 inch HD non-touch slim panel — a 30-pin eDP display-only panel with mounting holes top and bottom, no touch layer and no digitizer
- Panel: a-Si TFT-LCD TN, matte anti-glare with 3H hard coating, slim 306.3 x 195.2 mm panel with face mounting holes top and bottom, 220 cd/m²
- Testing: every unit is double tested before shipping — display, touch and fitment
Technical Specifications
| Item | Detail |
|---|---|
| Panel model codes | B133XTN01.7 and B133XTN01.5 — read the code printed on the label of the screen you are removing and order against that |
| Screen size | 13.3 inches diagonal (33.8 cm), 16:9 |
| Resolution | 1366 x 768 px (WXGA HD), 118 PPI |
| Refresh rate | 60 Hz |
| Panel technology | a-Si TFT-LCD, TN, normally white, transmissive — matte anti-glare surface with hard coating 3H, WLED edge-lit backlight with the LED driver on the panel board, 262K colours (6-bit) at 45% NTSC |
| Brightness | 220 cd/m² typical on the 30-pin slim panel this listing supplies. Panel records for the B133XTN01.5 code quote 250 cd/m², so a code-for-code match is the safe way to order |
| Contrast ratio | 400:1 typical on the 30-pin slim panel this listing supplies; the records for the B133XTN01.7 code quote 600:1, so the two codes are not identical in contrast either |
| Touch | Non-touch, display-only panel. Touch builds of these laptops take a separate bonded assembly instead of this bare panel |
| Connector — check before ordering | 30-pin eDP (1 lane) at 3.3 V on the panel this listing supplies. The same code family also shipped with a 40-pin connector, and panel records describe both the B133XTN01.5 and the B133XTN01.7 codes as 40-pin revisions on some datasheets. Count the contacts on your old screen's plug before ordering: a 40-pin screen will not connect to a 30-pin cable, and we will not ship this panel against a 40-pin machine |
| Connector position | Bottom right, viewed from the back of the panel |
| Outline dimensions | 306.3 x 195.2 x 3.0 mm on the 30-pin slim panel this listing supplies. Records for the B133XTN01.5 code measure 305.35 x 192.82 mm on the 40-pin revision, and the records for the B133XTN01.7 code disagree between 306.3 x 188.7 mm and 306.3 x 195.2 mm — so measure the screen you are removing rather than ordering from the code alone |
| Surface finish | Matte anti-glare on the panel this listing supplies. Some records describe the B133XTN01.7 code as a glossy (Haze 0%) front, so if you specifically need a gloss panel tell us before ordering |
| Mounting | Face mounting holes along the top and bottom edges — eight holes in all, on the slim panel this listing supplies. Check the panel you are removing, because the same 13.3 inch HD size is also built on a flat bracketless frame |
| Cross-reference panel codes | The same 13.3 inch HD slim frame is also supplied under B133XTN01.6, B133XTN01.3, B133XTN01.2, B133XTN01.0, M133NWN1 R3, HB133WX1-402 and N133BGE-EAB |
| NOT the 40-pin revision | If the plug on your old screen has 40 contacts, or the panel measures 305.35 x 192.82 mm, it is the 40-pin revision of this family and this panel will not connect. Send us the label code and a connector photo and we will match you to the right part instead of shipping the wrong one |
| NOT the bracketless panel | The NT133WHM-N35 and N133BGA-EA2 codes are a 300.26 x 187.27 mm bracketless panel with no mounting tabs at all — a different frame that does not mount where this panel mounts |
| NOT the higher-resolution panel | The 1920 x 1080 build of these laptops takes a different panel on a different cable; this listing is the 1366 x 768 HD panel only |
| Condition | Brand-new, unassembled |
| Quality | iProGadgets OEM Quality |
Compatibility
| Device | Model numbers / part codes |
|---|---|
| Panel codes covered | B133XTN01.7 and B133XTN01.5, supplied as the 30-pin slim panel; the same frame also answers for B133XTN01.6, B133XTN01.3, B133XTN01.2, B133XTN01.0, M133NWN1 R3, HB133WX1-402 and N133BGE-EAB |
| Same panel listed separately | We already list this panel against the B133XTN01.6 and B133XTN01.3 codes, so a search for either of those finds both listings — and the one you are reading adds the .7 and .5 coverage |
| Reported machine coverage | That coverage comes from supplier cross-lists rather than each maker's own parts list, so send us the code from your own label and we will check it honestly before dispatch |
| NOT the 40-pin revision | A screen whose plug has 40 contacts, or that measures 305.35 x 192.82 mm, is the 40-pin revision of this family and does not connect to a 30-pin cable |
| NOT the bracketless panel | N133BGA-EA2 and NT133WHM-N35 are a 300.26 x 187.27 mm bracketless panel — a different frame with no mounting tabs |
| NOT touch, NOT FHD | Touch builds and the 1920 x 1080 build of these laptops each take a different assembly; this listing is the 1366 x 768 HD non-touch panel only |
Before We Ship — Please Send Us These 3 Details
Laptop, all-in-one and desktop PC screens can differ between revisions of the same model, so the listing alone cannot always tell us which panel is inside your machine. After you place the order we will contact you for the three items below — please send them so we can confirm the fitment and ship the correct, fully compatible screen straight away:
- A photo of your computer. A clear photo of the laptop itself, plus the model / service label on the bottom cover (or the model name shown in Settings → About).
- Touch or non-touch, resolution and refresh rate. Tell us whether your screen is a touch screen or a non-touch screen, its resolution, and its refresh rate in Hz. If you are not sure, just send the model number and we will check it for you.
- Photos of your old screen. Once the machine is opened, a full photo of the back of the old screen and a close-up of the label or barcode sticker on it. That label carries the exact panel part number, which removes any doubt about which screen you need.
We check your photos against our stock before dispatch. If something does not match, we will contact you first instead of sending a part that may not fit. Once your details are confirmed, we arrange shipment within 1 to 3 business days. Thank you for helping us get it right.
Installation Notes
- Clean the flex cable with alcohol before installation and confirm that it is well connected.
- Do not pull, tear or push on the flex cable, be careful during installation.
- Before installing the screen, please remove the battery in advance.
- Please tap the screen carefully, because the screen is too fragile to damage.
Quality Control
Strictly tested by the iProGadgets QC Team — every unit is double tested before shipping and ships in good working order. After receiving the part, please check the appearance and test it first: connect the part to the motherboard for a functional test before full installation, and only install once everything works. We are not responsible for any installation mistakes — if you are not experienced with screen replacement, have the part fitted by a professional repair shop.
Shipping
We ship worldwide. Orders are dispatched within 1 to 3 business days, and every package carries a tracking number you can follow on the order page. Delivery typically takes 7 to 10 days after dispatch.
Returns & Warranty
30-day returns on unused, uninstalled parts. The warranty is valid until installed — once a screen has been fitted, the return window no longer applies, which is why we ask you to test before installation.
FAQs
How do I tell whether I need the 30-pin or the 40-pin version?
Count the contacts inside the plug on the end of your old screen's flex cable. A 30-pin plug is the narrow one, about 20 mm across; a 40-pin plug is about 25 mm across. Then measure the panel: this listing's panel is 306.3 x 195.2 mm on a 40-pin-free frame, while the 40-pin revision of the same family is 305.35 x 192.82 mm. The panel this listing supplies is the 30-pin version, so if your plug has 40 contacts it will not connect — send us a photo of the connector and the label and we will point you at the right part rather than ship one that does not fit.
Which code do I need — B133XTN01.7 or B133XTN01.5?
Both codes are quoted for this same 13.3 inch HD slim frame and we supply against either, but they are not identical panels across every record: the B133XTN01.5 code is catalogued at 250 cd/m² with 400:1 contrast on a 305.35 x 192.82 mm 40-pin revision, while the B133XTN01.7 code is catalogued at 220 cd/m² with 600:1. Both are matte on the panel we ship. If the picture has to match what you had, send us the code from the label on the screen you are removing and we will supply to that code rather than to a compatible one.
Is this the touch version or the non-touch version?
This is the non-touch display-only panel — the screen on its own, with no touch layer or digitizer bonded to it. Touch and non-touch screens for the same machine are different assemblies and do not interchange, so please check before ordering: if the screen you are removing responds to finger or stylus input, send us your machine model and the code from the label and we will confirm the right part for you.
Questions about fit, shipping to your country, or bulk pricing? Email sales@iProGadget.com and we will confirm the exact part you need.
Frequently Asked Questions
Is this part compatible with my device?
This listing is for Replacement LCD Screen Display For B133XTN01.7 B133XTN01.5 13.3 inch HD Slim Panel. It is built as a direct-fit replacement for the model named in the title. Match the model number in the title against your own device before ordering. If you are not sure which version you need, email sales@iProGadget.com and we will confirm the correct part for you.
What is the quality of these replacement parts?
We supply iProGadgets OEM Quality / Premium Compatible replacement parts. Every part is manufactured to OEM specifications, so the fit, finish and function match the original component it replaces, and each unit is individually tested before it leaves our warehouse.
Is the part tested before it is shipped?
Yes. Every part we sell is inspected before dispatch and tested wherever testing applies — screen assemblies are checked on the panel, the touch response and the connector. Orders are processed and shipped within 1-3 business days after payment is confirmed.
How long does shipping take?
Orders leave our warehouse within 1-3 business days. Express Shipping (DHL, UPS or FedEx) takes 5-8 working days and is normally used for parcels over 2 kg. Registered Air Post takes 10-20 working days and is normally used for parcels under 2 kg. Every order ships with a tracking number. Customs clearance can add extra time, especially during peak season.
Will I be charged import duties or customs fees?
Customs charges depend on your own country's import rules and its de minimis threshold, not on the seller. Some destinations apply no duty at all on lower-value parcels, and where duty or VAT does apply it is collected by your local post office or courier before delivery. We ship every order with complete and accurate commercial documents, which is what keeps a parcel moving through customs instead of sitting in it. If you would like to estimate the charges before you order, email us your country and we will point you to the right authority.
What is your return policy?
We offer a 30-day return policy, which means you can request a return within 30 days of receiving your item. To be eligible, the item must be unused, uninstalled and in the packaging it arrived in. Once a part has been fitted, bonded or used it cannot be returned, so please test the part before installation. To start a return, email sales@iProGadget.com.
What should I do if the part arrives damaged or faulty?
Inspect your order as soon as it arrives. If an item is defective, damaged or not what you ordered, contact us at sales@iProGadget.com straight away with photos or a short unboxing video, and we will arrange a replacement or a refund.
Do you provide repair guides or installation tutorials?
No. We are a supplier of replacement parts only. We are not a repair shop, and we do not provide repair guides, tutorials or step-by-step installation support. Every part we sell is intended to be installed by a professional technician at a qualified repair shop, which also gives the best result: a technician can transfer the small components, handle the adhesives and test the finished repair. Please do not attempt the installation yourself if you have no previous repair experience, as these assemblies are fragile and incorrect handling can damage them permanently. We sell parts only and do not accept responsibility for installation carried out by the customer. Our warranty covers the part itself and remains valid until the part is installed. If a problem appears after the repair, please take the device back to the repair shop that fitted the part so they can inspect the installation and test the device.
Still have a question about this part? Email us at sales@iProGadget.com and we will confirm compatibility, shipping time or return details for you.
