Replacement LCD Screen Display For NT156FHM-N41 15.6 inch FHD 1920x1080 Panel
iProGadgets OEM Repair Parts for NT156FHM-N41 15.6 inch FHD 1920x1080 Laptop Screen Replacement — Quick Answers
Quick answer: this is a replacement display panel for the NT156FHM-N41 (factory codes BOE0687 / BOE0690 / BOE0729 / BOE0826 / BOE06BA) — 15.6″, TN LCD, 1920 x 1080 px (FHD), 60 Hz, 220 cd/m², 500:1 contrast, 45/45/20/40 viewing angle, matte, 30-pin eDP, supplied with the top and bottom mounting holes already in the panel, non-touch, double tested before shipping and backed by a 30-day return window on unused, uninstalled parts. Check the NV prefix before ordering. The closely related NV156FHM-N41 is an ADS wide-angle panel rated at 85/85/85/85 with 16.7 million colours — same size, same resolution, same 30-pin connector, but a different panel. If your label reads NV156FHM, this is the wrong one.
- Fit: Compatible with 15.6″ FHD laptops that use the 30-pin eDP NT156FHM-N41 panel,This is the 60 Hz panel — 120 Hz and faster panels use 40-pin connectors and different codes. Send us the machine model or a photo of the label and we will confirm before dispatch
- Panel: TN (normally white) LCD, non-touch, matte finish, 30-pin eDP
- Testing: every unit is double tested before shipping — display, backlight and fitment
Technical Specifications
| Item | Detail |
|---|---|
| Panel model | For the NT156FHM-N41 (factory codes BOE0687, BOE0690, BOE069C, BOE0729, BOE0826, BOE06BA) |
| Screen size | 15.6 inches diagonal |
| Resolution | 1920 x 1080 px (FHD) |
| Refresh rate | 60Hz |
| Pixel density | 141 ppi |
| Pixel size | 0.17925 x 0.17925 mm |
| Aspect ratio | 16:9 |
| Pixel format | RGB vertical stripe |
| Panel technology | a-Si TFT-LCD, LCM (Liquid Crystal Module), TN, normally white, transmissive, 6 o'clock optimum viewing direction |
| Brightness | 220 cd/m² (typical) |
| Contrast ratio | 500:1 (typical, transmissive) |
| Viewing angle | 45 / 45 / 20 / 40 (typical, CR>=10) — L / R / U / D |
| Colour depth | 262K (6-bit), 45-47% NTSC |
| Colour coverage | sRGB 66%, AdobeRGB 50%, DCI-P3 49% |
| Response time | 12 ms (typical, Tr+Td) |
| Surface | Matte (anti-glare) with 3H hard coating |
| Backlight | WLED (White LED), edge-lit, 9S4P, 15,000 hours rated, LED driver included in the panel |
| Signal interface | eDP, 2 lanes, eDP 1.2, HBR1 (2.7G/lane), 30-pin, 3.3V, UJU IS050-L30B-C10, 0.5 mm pitch |
| Frame profile | Slim (PCBA flat, thickness 3.2 mm or less), landscape |
| Mounting | Face mounting holes, 8 pcs, on the top and bottom slugs — the brackets are part of this panel |
| Active area | 344.16 x 193.59 mm |
| Panel weight | 375 g maximum |
| Operating temperature | 0 to 50 °C |
| Storage temperature | -20 to 60 °C |
| Versions seen | Base NT156FHM-N41, plus a v8.1 revision sold as a substitute for the NV156FHM-N40. The factory record for the base panel is what this listing states; name the version in the order notes and we will confirm what we can ship |
| Touch | Display-only panel (no touch layer) |
| Panel line note | This is the NT line — TN normally white, narrow viewing angle, 220 nit, 262K colours. The NV156FHM-N41 is the ADS wide-angle panel rated at 85/85/85/85 with 200 nit and 16.7 million colours. They are different panels and neither replaces the other |
| NOT a high-refresh panel | 120 Hz and faster 15.6″ panels use 40-pin connectors and different part codes — they are not covered by this listing |
| Condition | Brand-new, unassembled |
| Quality | iProGadgets OEM Quality |
Compatibility
| Device | Model numbers |
|---|---|
| Panel codes | NT156FHM-N41, NT156FHM N41 |
| Where to confirm fitment | Send the machine model, or a photo of the label on the back of the screen you are removing — we will check it against our stock before dispatch |
Before We Ship — Please Send Us These 3 Details
Laptop, all-in-one and desktop PC screens can differ between revisions of the same model, so the listing alone cannot always tell us which panel is inside your machine. After you place the order we will contact you for the three items below — please send them so we can confirm the fitment and ship the correct, fully compatible screen straight away:
- A photo of your computer. A clear photo of the laptop itself, plus the model / service label on the bottom cover (or the model name shown in Settings → About).
- Touch or non-touch, resolution and refresh rate. Tell us whether your screen is a touch screen or a non-touch screen, its resolution, and its refresh rate in Hz. If you are not sure, just send the model number and we will check it for you.
- Photos of your old screen. Once the machine is opened, a full photo of the back of the old screen and a close-up of the label or barcode sticker on it. That label carries the exact panel part number, which removes any doubt about which screen you need.
We check your photos against our stock before dispatch. If something does not match, we will contact you first instead of sending a part that may not fit. Once your details are confirmed, we arrange shipment within 1 to 3 business days. Thank you for helping us get it right.
Installation Notes
- Clean the flex cable with alcohol before installation and confirm that it is well connected.
- Do not pull, tear or push on the flex cable, be careful during installation.
- Before installing the screen, please remove the battery in advance.
- Please tap the screen carefully, because the screen is too fragile to damage.
Quality Control
Strictly tested by the iProGadgets QC Team — every unit is double tested before shipping: the display is checked for dead pixels and uniformity, the backlight is checked for brightness and flicker, and the connector and flex are checked for fit. Only panels that pass both tests are packed. Quality wording: iProGadgets OEM Quality.
Shipping and Delivery
We ship within 1 to 3 business days after the order is confirmed. Each screen is wrapped in protective foam and packed in a strong corrugated carton to survive transit. We ship worldwide with tracked shipping so you can follow the parcel from dispatch to delivery.
Returns & Warranty
Every panel is covered by a 30-day return window on unused, uninstalled parts. Our warranty is valid until installed — once the screen is fitted we cannot take it back, so please confirm the fitment with us before installation. If the panel arrives damaged or does not match what you ordered, contact us within 30 days and we will make it right.
Questions before you order? Send us the machine model or a photo of the label on the back of the screen you are replacing, and we will confirm the fitment before you buy. Email sales@iProGadget.com — we reply within one business day.
Before We Ship — Please Send Us These 3 Details
Laptop, all-in-one and desktop PC screens can differ between revisions of the same model, so the listing alone cannot always tell us which panel is inside your machine. After you place the order we will contact you for the three items below — please send them so we can confirm the fitment and ship the correct, fully compatible screen straight away:
- A photo of your computer. A clear photo of the laptop itself, plus the model / service label on the bottom cover (or the model name shown in Settings → About).
- Touch or non-touch, resolution and refresh rate. Tell us whether your screen is a touch screen or a non-touch screen, its resolution, and its refresh rate in Hz. If you are not sure, just send the model number and we will check it for you.
- Photos of your old screen. Once the machine is opened, a full photo of the back of the old screen and a close-up of the label or barcode sticker on it. That label carries the exact panel part number, which removes any doubt about which screen you need.
We check your photos against our stock before dispatch. If something does not match, we will contact you first instead of sending a part that may not fit. Once your details are confirmed, we arrange shipment within 1 to 3 business days. Thank you for helping us get it right.
Installation Notes
- Clean the flex cable with alcohol before installation and confirm that it is well connected.
- Do not pull, tear or push on the flex cable, be careful during installation.
- Before installing the screen, please remove the battery in advance.
- Please tap the screen carefully, because the screen is too fragile to damage.
Quality Control
Strictly tested by the iProGadgets QC Team — every unit is double tested before shipping and ships in good working order. After receiving the part, please check the appearance and test it first: connect the new part to the motherboard for a functional test before full installation, and only install once everything works. We are not responsible for any installation mistakes — if you are not experienced with screen replacement, have the part fitted by a professional repair shop.
Shipping
We ship worldwide. Orders are dispatched within 1 to 3 business days, and every package carries a tracking number you can follow on the order page. Delivery typically takes 7 to 10 days after dispatch.
Returns & Warranty
30-day returns on unused, uninstalled parts. The warranty is valid until installed — once a screen has been fitted, the return window no longer applies, which is why we ask you to test before installation.
FAQs
Is this an IPS panel? One retailer lists it that way.
No — the factory record for the NT156FHM-N41 says TN, normally white, transmissive, with a 45/45/20/40 viewing angle. Some listings put the panel in an IPS category by mistake, or because the machine originally shipped with an IPS screen that this TN panel replaces. What you are buying here is the TN panel. If you specifically need the wide-angle version, that is the NV156FHM-N41.
How do I tell the NT156FHM-N41 apart from the NV156FHM-N41?
The first two letters, then the viewing angle. NT is TN, normally white, 45/45/20/40, 220 cd/m², 500:1, 262K colours. NV is ADS, normally black, 85/85/85/85, 200 cd/m², 800:1, 16.7 million colours. Both are 15.6″, 1920 x 1080, 60 Hz, 30-pin eDP with the same 0.5 mm pitch, so the connector will not tell them apart — read the full part code on the label. Substituting one for the other changes the viewing angle and the colour depth, so order the one your label actually reads.
Does this panel include mounting brackets?
Yes. This panel has eight face mounting holes, four on the top slug and four on the bottom slug, so the brackets are already part of it — nothing extra to fit. Some 15.6″ panels in this family are sold as bare panels with the tabs removed for universal compatibility, so check your own screen before ordering if bracket position matters to you.
Is this a touch screen, and what else is in the box?
This is the non-touch display panel only — no touch layer, no digitizer, no bezel, no hinges, no screws and no eDP cable. The cable is not included because on most repairs it stays with the machine and is undamaged. This is the standard base panel that repair shops use to build a touch screen assembly. If your screen has finger or pen input, this is not the right part — send us the label code and we will tell you what you need.
Questions about fit, shipping to your country, or bulk pricing? Email sales@iProGadget.com and we will confirm the exact part you need.
Frequently Asked Questions
Is this part compatible with my device?
This listing is for Replacement LCD Screen Display For NT156FHM-N41 15.6 inch FHD 1920x1080 Panel. It is built as a direct-fit replacement for the model named in the title. Match the model number in the title against your own device before ordering. If you are not sure which version you need, email sales@iProGadget.com and we will confirm the correct part for you.
What is the quality of these replacement parts?
We supply iProGadgets OEM Quality / Premium Compatible replacement parts. Every part is manufactured to OEM specifications, so the fit, finish and function match the original component it replaces, and each unit is individually tested before it leaves our warehouse.
Is the part tested before it is shipped?
Yes. Every part we sell is inspected before dispatch and tested wherever testing applies — screen assemblies are checked on the panel, the touch response and the connector. Orders are processed and shipped within 1-3 business days after payment is confirmed.
How long does shipping take?
Orders leave our warehouse within 1-3 business days. Express Shipping (DHL, UPS or FedEx) takes 5-8 working days and is normally used for parcels over 2 kg. Registered Air Post takes 10-20 working days and is normally used for parcels under 2 kg. Every order ships with a tracking number. Customs clearance can add extra time, especially during peak season.
Will I be charged import duties or customs fees?
Customs charges depend on your own country's import rules and its de minimis threshold, not on the seller. Some destinations apply no duty at all on lower-value parcels, and where duty or VAT does apply it is collected by your local post office or courier before delivery. We ship every order with complete and accurate commercial documents, which is what keeps a parcel moving through customs instead of sitting in it. If you would like to estimate the charges before you order, email us your country and we will point you to the right authority.
What is your return policy?
We offer a 30-day return policy, which means you can request a return within 30 days of receiving your item. To be eligible, the item must be unused, uninstalled and in the packaging it arrived in. Once a part has been fitted, bonded or used it cannot be returned, so please test the part before installation. To start a return, email sales@iProGadget.com.
What should I do if the part arrives damaged or faulty?
Inspect your order as soon as it arrives. If an item is defective, damaged or not what you ordered, contact us at sales@iProGadget.com straight away with photos or a short unboxing video, and we will arrange a replacement or a refund.
Do you provide repair guides or installation tutorials?
No. We are a supplier of replacement parts only. We are not a repair shop, and we do not provide repair guides, tutorials or step-by-step installation support. Every part we sell is intended to be installed by a professional technician at a qualified repair shop, which also gives the best result: a technician can transfer the small components, handle the adhesives and test the finished repair. Please do not attempt the installation yourself if you have no previous repair experience, as these assemblies are fragile and incorrect handling can damage them permanently. We sell parts only and do not accept responsibility for installation carried out by the customer. Our warranty covers the part itself and remains valid until the part is installed. If a problem appears after the repair, please take the device back to the repair shop that fitted the part so they can inspect the installation and test the device.
Still have a question about this part? Email us at sales@iProGadget.com and we will confirm compatibility, shipping time or return details for you.
