Replacement LCD Screen Display For Lenovo IdeaPad 330-17IKB 330-17AST L340-17IWL 5D10S56633 17.3inch HD+ Panel
iProGadgets OEM Repair Parts for Lenovo IdeaPad 330-17IKB 330-17AST L340-17IWL 5D10S56633 17.3inch HD+ Laptop Screen Replacement — Quick Answers
Quick answer: 17.3 inch HD+ anti-glare laptop LED panel — 1600 x 900, TN, 60 Hz, 220 cd/m², non-touch, with a 30-pin eDP connector at the bottom left, supplied as the bare screen with top and bottom mounting brackets and no hinges or screws. Every unit is double tested before shipping and covered by a 30-day return window on unused, uninstalled parts. Please read this before you order — the machines that take this screen also shipped with an FHD IPS panel, and the two are not interchangeable. They are the same 17.3 inch size, the same anti-glare finish and the same connector, and they differ only in resolution: this listing is the 1600 x 900 HD+ panel, while the FHD builds run 1920 x 1080. If the picture on your screen is 1920 x 1080 rather than 1600 x 900, this is not the panel you need, and the label on the back of your screen will carry a different service part code.
- Fit: Fits the 17.3 inch HD+ builds of the Lenovo IdeaPad 330-17AST (81D7), 330-17IKB (81DK, 81DM), 330-17ICH (81FL), L340-17IWL (81M0), L340-17IRH Gaming (81LL), V320-17IKB (81AH, 81CN) and V340-17IWL (81RG)
- Panel: a-Si TFT-LCD, TN, anti-glare (matte) with a 3H hard coating, 220 cd/m², 60 Hz, 30-pin eDP with the connector at the bottom left, non-touch — supplied as the bare panel with top and bottom mounting brackets
- Testing: every unit is double tested before shipping — display, backlight and fitment
Technical Specifications
| Item | Detail |
|---|---|
| Part number | 5D10S56633 |
| Screen size | 17.3 inches diagonal (439 mm) |
| Resolution | 1600 x 900 px (HD+), 106 ppi, 16:9 |
| Refresh rate | 60 Hz |
| Panel technology | a-Si TFT-LCD, LCM, TN, normally white, transmissive, 6 o'clock viewing direction |
| Brightness | 220 cd/m² typical (panel record). The machine specification sheets give 200 nits for the 330 (17 inch) family and 220 nits for the L340 and V340 (17 inch) family for this same HD+ option — the figures measure different things, so treat 220 cd/m² as the panel value |
| Finish | Anti-glare (matte), hard coating 3H |
| Touch | Non-touch. Display-only panel — no touch layer and no digitizer board |
| Signal interface | eDP 1.2, 30-pin connector, 3.3 V, 60 Hz |
| Connector position | Bottom left, viewed from the back of the screen; connector about 20 mm wide |
| Mounting | Mounting brackets along the top and bottom edge. The panel arrives as the bare screen without hinges or screws — the brackets, hinges and hinge covers already fitted in your machine stay in place |
| Compatible part numbers | 5D10J46203 (this same panel, earlier revision 0A) and 5D10J46202. One of these three codes may be printed on your label |
| NOT compatible with | The 17.3 inch FHD IPS panels fitted to the same machines — service parts 5D10Q16071, 5D10Q59856, 5D10R65304 and 5D10M56006. Same size, same anti-glare finish, same connector position, different resolution |
| Condition | Brand-new, unassembled |
| Quality | iProGadgets OEM Quality |
Compatibility
| Device | Model numbers / part codes |
|---|---|
| For Lenovo IdeaPad 330-17AST | 81D7 |
| For Lenovo IdeaPad 330-17IKB | 81DK · 81DM |
| For Lenovo IdeaPad 330-17ICH | 81FL |
| For Lenovo IdeaPad L340-17IWL | 81M0 |
| For Lenovo IdeaPad L340-17IRH Gaming | 81LL |
| For Lenovo V320-17IKB | 81AH · 81CN |
| For Lenovo V340-17IWL | 81RG |
| Also published for these machines — send us the code from your label first | IdeaPad L340-17API (81LY); the earlier 17.3 inch families that use the same HD+ panel code — IdeaPad 320-17ABR, 320-17AST, 320-17IKB, 320-17ISK, V320-17ISK, V110-17IKB, V110-17ISK and B71-80 |
| NOT these machines | Any FHD build of the models above — those take a 1920 x 1080 IPS panel. Check the resolution on your screen before ordering, because both variants are 17.3 inch and both use a 30-pin connector |
Before We Ship — Please Send Us These 3 Details
Laptop, all-in-one and desktop PC screens can differ between revisions of the same model, so the listing alone cannot always tell us which panel is inside your machine. After you place the order we will contact you for the three items below — please send them so we can confirm the fitment and ship the correct, fully compatible screen straight away:
- A photo of your computer. A clear photo of the laptop itself, plus the model / service label on the bottom cover (or the model name shown in Settings → About).
- Touch or non-touch, resolution and refresh rate. Tell us whether your screen is a touch screen or a non-touch screen, its resolution, and its refresh rate in Hz. If you are not sure, just send the model number and we will check it for you.
- Photos of your old screen. Once the machine is opened, a full photo of the back of the old screen and a close-up of the label or barcode sticker on it. That label carries the exact panel part number, which removes any doubt about which screen you need.
We check your photos against our stock before dispatch. If something does not match, we will contact you first instead of sending a part that may not fit. Once your details are confirmed, we arrange shipment within 1 to 3 business days. Thank you for helping us get it right.
Installation Notes
- Clean the flex cable with alcohol before installation and confirm that it is well connected.
- Do not pull, tear or push on the flex cable, be careful during installation.
- Before installing the screen, please remove the battery in advance.
- Please tap the screen carefully, because the screen is too fragile to damage.
Quality Control
Strictly tested by the iProGadgets QC Team — every unit is double tested before shipping and ships in good working order. After receiving the part, please check the appearance and test it first: connect the new part to the motherboard for a functional test before full installation, and only install once everything works. We are not responsible for any installation mistakes — if you are not experienced with screen replacement, have the part fitted by a professional repair shop.
Shipping
We ship worldwide. Orders are dispatched within 1 to 3 business days, and every package carries a tracking number you can follow on the order page. Delivery typically takes 7 to 10 days after dispatch.
Returns & Warranty
30-day returns on unused, uninstalled parts. The warranty is valid until installed — once a screen has been fitted, the return window no longer applies, which is why we ask you to test before installation.
FAQs
Is this the HD+ panel or the FHD panel — my machine could have either
This is the 1600 x 900 HD+ panel. Every machine in the list above shipped either with this HD+ panel or with a 1920 x 1080 FHD IPS panel, and the two are not interchangeable — same 17.3 inch size, same anti-glare finish, same connector, different resolution. The quickest check needs no tools: right-click an empty part of your desktop, open Display settings and read the resolution. 1600 x 900 means this listing, 1920 x 1080 means the FHD panel. If your desktop does not come up at all, count nothing and measure nothing — send us a photo of the label on the back of your screen and we will read it for you.
How do I read the label on my screen to be sure?
The label or barcode sticker on the back of the screen carries the service part code, and that code settles it. This listing is 5D10S56633. HD+ TN, anti-glare — and the same 17.3 inch HD+ panel is also published under 5D10J46203 (revision 0A) and 5D10J46202, so any of those three codes is this screen. The FHD builds carry a different code entirely — 5D10Q16071, 5D10Q59856, 5D10R65304 or 5D10M56006 — and those panels are not this part. Take a close-up photo of the label before you order and send it to us; it takes a minute and removes all doubt.
My machine is a 330-17ICH, L340-17IRH or V320-17IKB — is it covered?
Yes. Those three are named in the compatibility table above with their type codes, together with the 330-17AST, 330-17IKB, L340-17IWL and V340-17IWL, and we promise the fit on all seven families — provided your machine has the HD+ screen. Some aftermarket sellers also group the earlier 17.3 inch families (IdeaPad 320-17 and V110-17, B71-80) with these because they draw on the same HD+ panel code, and the L340-17API is often listed alongside the L340-17IWL. We do not promise those, so if your model is one of them, send us the code from the label on your screen first and we will tell you honestly whether this is the part you need.
Does the panel arrive with brackets, and will the connector line up?
The panel has mounting brackets along the top and bottom edge and a 30-pin eDP connector at the bottom left about 20 mm wide. It arrives as the bare screen, so the screws, hinges and hinge covers already fitted in your machine stay in place and are reused. Turn the screen you are removing face down and compare before you fit the replacement: the connector must sit in the same corner, and the flex must reach without stretching. If the connector sits in a different corner, send us a photo — a mismatch there is a physical-fitment problem, not a preference, and we will sort it out before you install anything.
Questions about fit, shipping to your country, or bulk pricing? Email sales@iProGadget.com and we will confirm the exact part you need.
Frequently Asked Questions
Is this part compatible with my device?
This listing is for Replacement LCD Screen Display For Lenovo IdeaPad 330-17IKB 330-17AST L340-17IWL 5D10S56633 17.3inch HD+ Panel. It is built as a direct-fit replacement for the model named in the title. Match the model number in the title against your own device before ordering. If you are not sure which version you need, email sales@iProGadget.com and we will confirm the correct part for you.
What is the quality of these replacement parts?
We supply iProGadgets OEM Quality / Premium Compatible replacement parts. Every part is manufactured to OEM specifications, so the fit, finish and function match the original component it replaces, and each unit is individually tested before it leaves our warehouse.
Is the part tested before it is shipped?
Yes. Every part we sell is inspected before dispatch and tested wherever testing applies — screen assemblies are checked on the panel, the touch response and the connector. Orders are processed and shipped within 1-3 business days after payment is confirmed.
How long does shipping take?
Orders leave our warehouse within 1-3 business days. Express Shipping (DHL, UPS or FedEx) takes 5-8 working days and is normally used for parcels over 2 kg. Registered Air Post takes 10-20 working days and is normally used for parcels under 2 kg. Every order ships with a tracking number. Customs clearance can add extra time, especially during peak season.
Will I be charged import duties or customs fees?
Customs charges depend on your own country's import rules and its de minimis threshold, not on the seller. Some destinations apply no duty at all on lower-value parcels, and where duty or VAT does apply it is collected by your local post office or courier before delivery. We ship every order with complete and accurate commercial documents, which is what keeps a parcel moving through customs instead of sitting in it. If you would like to estimate the charges before you order, email us your country and we will point you to the right authority.
What is your return policy?
We offer a 30-day return policy, which means you can request a return within 30 days of receiving your item. To be eligible, the item must be unused, uninstalled and in the packaging it arrived in. Once a part has been fitted, bonded or used it cannot be returned, so please test the part before installation. To start a return, email sales@iProGadget.com.
What should I do if the part arrives damaged or faulty?
Inspect your order as soon as it arrives. If an item is defective, damaged or not what you ordered, contact us at sales@iProGadget.com straight away with photos or a short unboxing video, and we will arrange a replacement or a refund.
Do you provide repair guides or installation tutorials?
No. We are a supplier of replacement parts only. We are not a repair shop, and we do not provide repair guides, tutorials or step-by-step installation support. Every part we sell is intended to be installed by a professional technician at a qualified repair shop, which also gives the best result: a technician can transfer the small components, handle the adhesives and test the finished repair. Please do not attempt the installation yourself if you have no previous repair experience, as these assemblies are fragile and incorrect handling can damage them permanently. We sell parts only and do not accept responsibility for installation carried out by the customer. Our warranty covers the part itself and remains valid until the part is installed. If a problem appears after the repair, please take the device back to the repair shop that fitted the part so they can inspect the installation and test the device.
Still have a question about this part? Email us at sales@iProGadget.com and we will confirm compatibility, shipping time or return details for you.
