Replacement LCD Screen Display For L22561-001 NT173WDM-N11 N21 17.3 inch HD+ 1600x900 Panel
iProGadgets OEM Repair Parts for L22561-001 NT173WDM-N11 N21 17.3 inch HD+ 1600x900 Laptop Screen Replacement — Quick Answers
Quick answer: this is a replacement display panel for the HP L22561-001, sold under panel codes NT173WDM-N11 and NT173WDM-N21 — 17.3″, TN LCD, 1600 x 900 px (HD+), 60 Hz, 30-pin eDP with the connector at the bottom left, non-touch, double tested before shipping and backed by a 30-day return window on unused, uninstalled parts. Connector position matters here — this panel connects at the left when you look at the back of the screen. Panels of the same size and resolution that connect at the bottom right (including the NT173WDM-N23 / N24 / N25 / N27 family) are a different part and will not fit, so please check yours before ordering.
- Fit: Compatible with HP 17-by series laptops — including 17-by1053dx, 17-by0010nr, 17-by0008ds and 17-by0062st — that shipped with the 30-pin bottom-left connector panel
- Panel: TN LCD, non-touch, anti-glare (matte)
- Testing: every unit is double tested before shipping — display, backlight and fitment
Technical Specifications
| Item | Detail |
|---|---|
| Part number | L22561-001 |
| Panel model | NT173WDM-N11 |
| Panel technology | a-Si TFT-LCD, TN, non-touch |
| Screen size | 17.3 inches diagonal |
| Resolution | 1600 x 900 px (HD+, WXGA++) |
| Refresh rate | 60Hz |
| Pixel density | 106 ppi |
| Aspect ratio | 16:9 |
| Surface | Anti-glare (matte) |
| Backlight | LED (Light Emitting Diode), DIODE lamp |
| Signal interface | eDP, 30-pin, 0.5 mm pitch, connector at BOTTOM LEFT |
| Connector position | Bottom left, viewed from the back of the screen |
| Panel format | Slim (narrow frame) |
| Touch | Display-only panel (no touch layer) |
| Compatible part numbers | L22561-001, NT173WDM-N11, NT173WDM N11, NT173WDM-N21, NT173WDM N21, LTN173KT04, LTN173KT04-301, B173RTN02.2, N173FGA-E34 Rev.C1, N173FGA-E44, 910136-002, 851051-002, HP-NOTEBOOK-PC-17 |
| NOT compatible with | NT173WDM-N23, NT173WDM-N24, NT173WDM-N25, NT173WDM-N27 — those connect at the bottom right and are a different panel |
| Compatible models | For HP 17-by 17-by1053dx 17-by0010nr 17-by0008ds 17-by0062st 17.3 inch HD 1600x900 LED LCD screen |
| Condition | Brand-new, unassembled |
| Quality | iProGadgets OEM Quality |
Compatibility
| Device | Model numbers / part codes |
|---|---|
| For HP 17-by series (bottom-left connector) | 17-by1053dx, 17-by0010nr, 17-by0008ds, 17-by0062st |
| Cross-referenced for HP part numbers | 910136-002, 851051-002, for HP-NOTEBOOK-PC-17 |
Before We Ship — Please Send Us These 3 Details
Laptop, all-in-one and desktop PC screens can differ between revisions of the same model, so the listing alone cannot always tell us which panel is inside your machine. After you place the order we will contact you for the three items below — please send them so we can confirm the fitment and ship the correct, fully compatible screen straight away:
- A photo of your computer. A clear photo of the laptop itself, plus the model / service label on the bottom cover (or the model name shown in Settings → About).
- Touch or non-touch, resolution and refresh rate. Tell us whether your screen is a touch screen or a non-touch screen, its resolution, and its refresh rate in Hz. If you are not sure, just send the model number and we will check it for you.
- Photos of your old screen. Once the machine is opened, a full photo of the back of the old screen and a close-up of the label or barcode sticker on it. That label carries the exact panel part number, which removes any doubt about which screen you need.
We check your photos against our stock before dispatch. If something does not match, we will contact you first instead of sending a part that may not fit. Once your details are confirmed, we arrange shipment within 1 to 3 business days. Thank you for helping us get it right.
Installation Notes
- Clean the flex cable with alcohol before installation and confirm that it is well connected.
- Do not pull, tear or push on the flex cable, be careful during installation.
- Before installing the screen, please remove the battery in advance.
- Please tap the screen carefully, because the screen is too fragile to damage.
Quality Control
Strictly tested by the iProGadgets QC Team — every unit is double tested before shipping and ships in good working order. After receiving the part, please check the appearance and test it first: connect the new part to the motherboard for a functional test before full installation, and only install once everything works. We are not responsible for any installation mistakes — if you are not experienced with screen replacement, have the part fitted by a professional repair shop.
Shipping
We ship worldwide. Orders are dispatched within 1 to 3 business days, and every package carries a tracking number you can follow on the order page. Delivery typically takes 7 to 10 days after dispatch.
Returns & Warranty
30-day returns on unused, uninstalled parts. The warranty is valid until installed — once a screen has been fitted, the return window no longer applies, which is why we ask you to test before installation.
FAQs
My screen is 17.3 inch HD+ 1600x900 with 30 pins — how do I know this is the right one?
Check the connector position on the back of your current screen. This panel connects at the bottom left when the screen is turned over. The NT173WDM-N23 / N24 / N25 / N27 panels are also 17.3″ HD+ with 30 pins, but they connect at the bottom right and are a different part — they will not fit this listing. If you are unsure which you have, send us a photo of the back of the screen and its label and we will confirm before dispatch.
The label on my screen says NT173WDM-N21 — is that this product?
Yes. NT173WDM-N21 and NT173WDM-N11 are two codes for the same 17.3″ 1600 x 900 panel with a bottom-left connector, so either code is covered by this listing. The part number that usually appears on HP spare-part labels for these machines is L22561-001, which is the same panel again.
Is this a touch screen?
No. This is the non-touch display panel only, with no touch layer or digitizer bonded on. Some 17.3″ HP machines shipped with a touch version that looks similar from the front. If your current screen responds to finger or pen input, this is not the right part — send us the part number from your label and we will tell you what you need.
Does the panel include the bezel, brackets or the eDP cable?
This is the bare slim panel with its integrated driver board. The eDP cable is not included, because on most repairs it stays with the machine and is undamaged. If you also need a cable or a bezel, send us a photo of your machine's screen area and we will tell you which additional parts fit.
Questions about fit, shipping to your country, or bulk pricing? Email sales@iProGadget.com and we will confirm the exact part you need.
Frequently Asked Questions
Is this part compatible with my device?
This listing is for Replacement LCD Screen Display For L22561-001 NT173WDM-N11 N21 17.3 inch HD+ 1600x900 Panel. It is built as a direct-fit replacement for the model named in the title. Match the model number in the title against your own device before ordering. If you are not sure which version you need, email sales@iProGadget.com and we will confirm the correct part for you.
What is the quality of these replacement parts?
We supply iProGadgets OEM Quality / Premium Compatible replacement parts. Every part is manufactured to OEM specifications, so the fit, finish and function match the original component it replaces, and each unit is individually tested before it leaves our warehouse.
Is the part tested before it is shipped?
Yes. Every part we sell is inspected before dispatch and tested wherever testing applies — screen assemblies are checked on the panel, the touch response and the connector. Orders are processed and shipped within 1-3 business days after payment is confirmed.
How long does shipping take?
Orders leave our warehouse within 1-3 business days. Express Shipping (DHL, UPS or FedEx) takes 5-8 working days and is normally used for parcels over 2 kg. Registered Air Post takes 10-20 working days and is normally used for parcels under 2 kg. Every order ships with a tracking number. Customs clearance can add extra time, especially during peak season.
Will I be charged import duties or customs fees?
Customs charges depend on your own country's import rules and its de minimis threshold, not on the seller. Some destinations apply no duty at all on lower-value parcels, and where duty or VAT does apply it is collected by your local post office or courier before delivery. We ship every order with complete and accurate commercial documents, which is what keeps a parcel moving through customs instead of sitting in it. If you would like to estimate the charges before you order, email us your country and we will point you to the right authority.
What is your return policy?
We offer a 30-day return policy, which means you can request a return within 30 days of receiving your item. To be eligible, the item must be unused, uninstalled and in the packaging it arrived in. Once a part has been fitted, bonded or used it cannot be returned, so please test the part before installation. To start a return, email sales@iProGadget.com.
What should I do if the part arrives damaged or faulty?
Inspect your order as soon as it arrives. If an item is defective, damaged or not what you ordered, contact us at sales@iProGadget.com straight away with photos or a short unboxing video, and we will arrange a replacement or a refund.
Do you provide repair guides or installation tutorials?
No. We are a supplier of replacement parts only. We are not a repair shop, and we do not provide repair guides, tutorials or step-by-step installation support. Every part we sell is intended to be installed by a professional technician at a qualified repair shop, which also gives the best result: a technician can transfer the small components, handle the adhesives and test the finished repair. Please do not attempt the installation yourself if you have no previous repair experience, as these assemblies are fragile and incorrect handling can damage them permanently. We sell parts only and do not accept responsibility for installation carried out by the customer. Our warranty covers the part itself and remains valid until the part is installed. If a problem appears after the repair, please take the device back to the repair shop that fitted the part so they can inspect the installation and test the device.
Still have a question about this part? Email us at sales@iProGadget.com and we will confirm compatibility, shipping time or return details for you.
