Replacement LCD Screen Display For Dell FC3HY 0FC3HY Inspiron 24 3455 23.8 inch FHD Panel
iProGadgets OEM Repair Parts for the Dell Inspiron 24 3455 All-in-One — Screen Reference and Fitment Check
Quick answer: this is a brand-new 23.8 inch FHD non-touch screen — the 1920 x 1080 IPS matte anti-glare panel sold under part code FC3HY for the Dell Inspiron 24 3455 all-in-one. It is a bare panel: no touch layer, no digitizer glass, no touch lead, on a 30-pin LVDS connector at 60 Hz. Two things decide whether it fits, so please check both before ordering. The screen you are removing must be non-touch — the same chassis was also sold with a touchscreen, and that is a different assembly, not a different option on this panel. And the same chassis was offered with a 4K UHD screen that this panel does not replace. Every unit is double tested before shipping and covered by a 30-day return window on unused, uninstalled parts.
- Fit: The FHD non-touch screen for the Dell Inspiron 24 3455 all-in-one on part code FC3HY, on the same chassis as the Inspiron 24 3452, 3459 and 3464 and the OptiPlex 7440 and 7450 all-in-one. 30-pin LVDS signal connector and a separate backlight plug on one long edge, no side brackets, no touch layer
- Panel: IPS (a-Si TFT-LCD), normally black, matte anti-glare with a 3H hard coat, 1920 x 1080, about 250 cd/m² typical, 60 Hz, on a 30-pin LVDS connector — and non-touch, so there is no touch layer, no digitizer glass to transfer across and no touch lead on the machine for it to connect to
- Testing: every unit is double tested before shipping — display check and fitment check against the machine it is sold for
Technical Specifications
| Item | Detail |
|---|---|
| Part number — this listing | The 23.8 inch FHD non-touch screen this all-in-one chassis takes, sold under part code FC3HY, also written 0FC3HY. The model name on the computer does not identify the panel — the same chassis was built with a touch screen and with a 4K screen as well as with this one — so read the label on the back of the screen you are removing and compare it with the rows below before ordering |
| The machine this screen is sold for | The Dell Inspiron 24 3455 all-in-one, and the same chassis across the Inspiron 24 3452, 3459 and 3464 and the OptiPlex 7440 and 7450 all-in-one. All of them take this 23.8 inch 1920 x 1080 matte non-touch panel on a 30-pin LVDS connector. The family was also sold with a touchscreen and with a 4K panel as separate assemblies, which is the first thing to check |
| Panel codes covered | Read the code printed on the back of the screen you are removing — either spelling is this panel — and send it to us |
| Screen size | 23.8 inches diagonal (60.45 cm), 16:9, about 92 PPI |
| Resolution | 1920 x 1080 px (FHD / 1080p) |
| Refresh rate | 60 Hz. The panel factory record and the published documentation for these machines agree on 60 Hz for this screen, so there is no figure to reconcile here and no faster variant of this part |
| Panel technology | IPS, a-Si TFT-LCD, normally black, transmissive, with WLED edge backlighting along one long edge and no separate backlight driver. Matte anti-glare surface with a 3H hard coat, viewing angle 89/89/89/89, contrast 1000:1, response about 14 ms grey to grey, 16.7 million colours. There is no glossy option on this chassis — the machines were sold anti-glare — so a matte screen is what you are removing and a matte screen is what you get |
| Brightness and colour | 250 cd/m² typical with 75% NTSC and 1000:1 contrast in the panel factory record for M238HAN01.0. Some suppliers advertise this code as a high-gamut 100% sRGB screen; that is the same panel described the other way round, because 100% sRGB and roughly 72-75% NTSC express a similar colour coverage, and we print both rather than round either one. There is no second brightness figure on this part |
| Touch | No — non-touch. There is no touch layer inside this panel, no digitizer glass bonded over it and no touch connector on it. The same chassis was also sold with a bonded touchscreen, which is a different assembly rather than a different option on this one, so touch is the first thing to check: if the screen you are removing answers to your finger, this is not the part you need |
| Signal interface | LVDS, 2 channels, 8-bit, on a 30-pin connector, 5.0 V. The backlight is fed from the same long edge of the panel. Because this is the non-touch build there is no third lead to release — two connections, not three |
| Connector position | On one long edge of the panel. Supplier records for this code disagree on whether it sits at the left or the right end of that edge, so rather than print a guess we ask: photograph the back of the screen you are removing before you order and send it to us, and we will confirm the side and the plug against our stock. Connector side is a fitment fact, not a detail — it is one of the two commonest causes of a wrong-order return on all-in-one screens |
| Outline and mounting | Outline about 543 mm wide x 317.4 mm high x 11.2 mm deep; active area 527.04 x 296.46 mm; weight about 2.28 kg. The driver strip is bonded along one long edge, so handle the panel by its short edges and never flex the long edge. Mounting is by threaded holes at the rear of the panel, with no side brackets and no lugs — the screen sits behind the front bezel rather than being screwed to a frame, so have the bezel adhesive ready before you start |
| NOT the touch screen from the same chassis | This chassis was sold with a bonded touchscreen as well, and that is a different assembly: the touch layer and its controller are part of the panel, and the machine runs a separate touch lead to it. This panel has neither, so it cannot serve a touch machine — there would be a touch lead with nothing to connect it to — and a touch panel cannot serve a non-touch machine either. Touch the screen you are removing: if it responds to your finger, do not order this one, send us the model and we will quote the correct assembly |
| NOT the 4K panel from the same chassis | The OptiPlex 7440 all-in-one and its siblings were also offered with a 3840 x 2160 panel. That screen has a different resolution, a different connector count and a different cable, and the two are not interchangeable in either direction. The test takes ten seconds and needs no tools: in Windows right-click the desktop, open Display settings, and read the resolution. If it says 3840 x 2160, this is not your replacement panel |
| Condition | Brand-new, unassembled |
| Quality | iProGadgets OEM Quality |
Compatibility
| Device | Model numbers / part codes |
|---|---|
| Machine coverage — confirmed | For Dell Inspiron 24 3455 all-in-one, non-touch build. Suppliers publishing part code FC3HY list it against this machine, and the panel on a matte anti-glare surface with a 30-pin LVDS connector |
| Machine coverage — same chassis, other models | For Dell Inspiron 24 3452, Inspiron 24 3459 and Inspiron 24 3464 all-in-one, and the OptiPlex 7440 and OptiPlex 7450 all-in-one. All of them share this 23.8 inch panel outline and this connector, so the replacement part is the same — but each of those models was also offered with a touch screen, and the OptiPlex 7440 with a 4K panel as well, so the label on the panel decides rather than the model name on the machine |
| Cross-referenced part codes | Suppliers quote 0FC3HY, MD88F, 0TF2H3 and 04X8K against this screen, and this store lists it under 0TF2H3 in its own entry as well. Those are search terms quoted by suppliers rather than our own stock codes |
| NOT the touch screen for these machines | This chassis was sold with a bonded touchscreen as well, and that is a different assembly: the touch layer and its controller are part of the panel, and the machine runs a separate touch lead to it. This panel has neither, so it cannot serve a touch machine — there would be a touch lead with nothing to connect it to — and a touch panel cannot serve a non-touch machine either. Touch the screen you are removing: if it responds to your finger, do not order this one, send us the model and we will quote the correct assembly |
| NOT the 4K panel for the same chassis | The OptiPlex 7440 all-in-one and its siblings were also offered with a 3840 x 2160 panel. That screen has a different resolution, a different connector count and a different cable, and the two are not interchangeable in either direction. The test takes ten seconds and needs no tools: in Windows right-click the desktop, open Display settings, and read the resolution. If it says 3840 x 2160, this is not your replacement panel |
Before We Ship — Please Send Us These 3 Details
This all-in-one chassis was sold with more than one screen, and the model label on the machine does not say which one is inside, so the listing alone cannot always tell us what to send. After you place the order we will contact you for the three items below — please send them so we can confirm the fitment and dispatch the correct screen straight away:
- A photo of your computer. A clear photo of the whole machine, plus the model and serial label on the rear. That label identifies the model and configuration, and on these all-in-ones it is the fastest way for us to see which display option the machine was built with.
- Whether the screen you are removing is touch. Touch the display you are replacing and tell us whether it responds. This panel has no touch layer, so a touch screen means we need to quote a different assembly. If the old screen is already dead, say so — we will work it out from the photos instead.
- Photos of the old screen. A full photo of the back of the panel you are removing and a close-up of the label on it. That label carries the panel code, and it settles which screen you need far more reliably than the model of the computer does.
We check your photos against our stock before dispatch. If something does not match, we will contact you first instead of sending a part that may not fit. Once your details are confirmed, we arrange shipment within 1 to 3 business days. Thank you for helping us get it right.
Installation Notes
- Unplug the power cord and hold the power button for a few seconds before you start. These all-in-ones have no battery, but the power supply stays live and the panel connector is not designed to be mated or unmated with it energised.
- The screen sits behind the front bezel rather than being screwed to a frame, so the bezel comes off first. Work slowly, warm the adhesive evenly, and use a suction cup on the panel rather than prying at its edge — a flexed panel cracks long before it bends.
- Two connections have to be released on this non-touch panel: the LVDS signal plug and the backlight plug. They sit on the same long edge of the panel. Release any latch before pulling, and never pull on the wires themselves.
- Clean the flex cables with alcohol before installation and confirm that each one is fully seated and latched.
- Do not pull, tear or push on the flex cables, be careful during installation.
- Handle the panel by its short edges only, and never flex the long edge where the driver strip is bonded.
- Test the panel on the connectors before you bond it into the bezel or refit the rear cover, and keep the protective film on until it works.
- Please tap the screen carefully, because the screen is too fragile to damage.
Quality Control
Strictly tested by the iProGadgets QC Team — every unit is double tested before shipping and ships in good working order, including a display check at full resolution. After receiving the part, please check the appearance and test it first: connect the part to the machine for a functional test before full installation, and only reassemble once everything works. We are not responsible for any installation mistakes — if you are not experienced with all-in-one screen replacement, have the part fitted by a professional repair shop.
Shipping
We ship worldwide. Orders are dispatched within 1 to 3 business days, and every package carries a tracking number you can follow on the order page. Delivery typically takes 7 to 10 days after dispatch.
Returns & Warranty
30-day returns on unused, uninstalled parts. The warranty is valid until installed — once a screen has been fitted, the return window no longer applies, which is why we ask you to test before installation.
FAQs
How do I check that this is the screen I need?
Open the machine far enough to see the back of the panel and read its label — that is the only reliable answer, and the model name of the computer will not give it to you, because this chassis was built with a touch screen and with a 4K screen as well as with this one. The screen you are removing should be 23.8 inch, 1920 x 1080, matte anti-glare with no touch layer, on a 30-pin LVDS plug, and its own label should carry one of the panel codes this listing covers. Send us a photo of that label and we will match it before dispatch instead of shipping a screen that may not fit.
Can I fit this panel to a machine that has a touchscreen?
No. In this family a touchscreen is a different assembly, not a software option: the touch layer and its controller are built into the panel, and the machine runs a separate touch lead to it. This panel has no touch layer and no touch connector, so a touch machine would be left with a touch lead and nothing to connect it to, and no touch function. It does not work in the other direction either — a non-touch machine cannot be serviced with a touch panel. Touch the screen you are removing, and if it responds to your finger do not order this one: send us the model of your computer and a photo of the back of the display and we will quote the correct assembly instead.
My machine has a 4K screen — is this the right replacement?
No, and it is worth confirming before you order, because the same chassis left the factory with both. The 4K panel in these machines is 3840 x 2160 on a different connector count, and it is not interchangeable with this 1920 x 1080 screen — the machine's own display cable is built for the panel that shipped in it. Check before you take anything apart: in Windows, right-click the desktop, open Display settings and read the resolution. If it reads 3840 x 2160, this is not your part — send us a photo of the panel label and we will source the right one for you.
Questions about fit, shipping to your country, or bulk pricing? Email sales@iProGadget.com and we will confirm the exact part you need.
Frequently Asked Questions
Is this part compatible with my device?
This listing is for Replacement LCD Screen Display For Dell FC3HY 0FC3HY Inspiron 24 3455 23.8 inch FHD Panel. It is built as a direct-fit replacement for the model named in the title. Match the model number in the title against your own device before ordering. If you are not sure which version you need, email sales@iProGadget.com and we will confirm the correct part for you.
What is the quality of these replacement parts?
We supply iProGadgets OEM Quality / Premium Compatible replacement parts. Every part is manufactured to OEM specifications, so the fit, finish and function match the original component it replaces, and each unit is individually tested before it leaves our warehouse.
Is the part tested before it is shipped?
Yes. Every part we sell is inspected before dispatch and tested wherever testing applies — screen assemblies are checked on the panel, the touch response and the connector. Orders are processed and shipped within 1-3 business days after payment is confirmed.
How long does shipping take?
Orders leave our warehouse within 1-3 business days. Express Shipping (DHL, UPS or FedEx) takes 5-8 working days and is normally used for parcels over 2 kg. Registered Air Post takes 10-20 working days and is normally used for parcels under 2 kg. Every order ships with a tracking number. Customs clearance can add extra time, especially during peak season.
Will I be charged import duties or customs fees?
Customs charges depend on your own country's import rules and its de minimis threshold, not on the seller. Some destinations apply no duty at all on lower-value parcels, and where duty or VAT does apply it is collected by your local post office or courier before delivery. We ship every order with complete and accurate commercial documents, which is what keeps a parcel moving through customs instead of sitting in it. If you would like to estimate the charges before you order, email us your country and we will point you to the right authority.
What is your return policy?
We offer a 30-day return policy, which means you can request a return within 30 days of receiving your item. To be eligible, the item must be unused, uninstalled and in the packaging it arrived in. Once a part has been fitted, bonded or used it cannot be returned, so please test the part before installation. To start a return, email sales@iProGadget.com.
What should I do if the part arrives damaged or faulty?
Inspect your order as soon as it arrives. If an item is defective, damaged or not what you ordered, contact us at sales@iProGadget.com straight away with photos or a short unboxing video, and we will arrange a replacement or a refund.
Do you provide repair guides or installation tutorials?
No. We are a supplier of replacement parts only. We are not a repair shop, and we do not provide repair guides, tutorials or step-by-step installation support. Every part we sell is intended to be installed by a professional technician at a qualified repair shop, which also gives the best result: a technician can transfer the small components, handle the adhesives and test the finished repair. Please do not attempt the installation yourself if you have no previous repair experience, as these assemblies are fragile and incorrect handling can damage them permanently. We sell parts only and do not accept responsibility for installation carried out by the customer. Our warranty covers the part itself and remains valid until the part is installed. If a problem appears after the repair, please take the device back to the repair shop that fitted the part so they can inspect the installation and test the device.
Still have a question about this part? Email us at sales@iProGadget.com and we will confirm compatibility, shipping time or return details for you.
