Replacement LCD Touch Screen Display For HP 15-DW 15T-DW 15-DW0043DX L52001-001 15.6 inch HD Panel
iProGadgets OEM Repair Parts for HP 15-DW 15T-DW 15-DW0043DX L52001-001 15.6 inch HD Laptop Screen Replacement — Quick Answers
Quick answer: this is a replacement 15.6 inch display for the HP L52001-001 — HD 1366 x 768 px, 60 Hz, 220 cd/m², glossy BrightView, with the on-cell touch layer bonded inside the panel and a 40-pin eDP connector at the bottom right. Every unit is double tested before shipping and is covered by a 30-day return window on unused, uninstalled parts. Please read this before you order — the same chassis shipped with five different panels. This is the 40-pin glossy HD touch panel. The others are the HD non-touch panel (L52000-001), the HD anti-glare non-touch panel (L51999-001), the FHD non-touch panels (L51997-001 and L51998-001) and the FHD touch panel (L52156-001). They all look the same from the front and none of them is interchangeable — count the pins on the connector on the back of your screen: 40 pins means the touch assembly, 30 pins means a non-touch machine and this is not the part you need, so if you found it that way, it is the same screen.
- Fit: Fits the HP 15-dw and 15T-dw laptops — the 15-dw0000, 15-dw1000, 15-dw2000, 15-dw3000 and 15-dw4000 ranges, including 15-DW0043DX, 15-DW0025CL, 15-DW0030NR, 15-DW0034WM, 15-DW0035CL, 15-DW0036WM, 15-DW0038WM, 15-DW0010DS, 15-DW0011DS, 15-DW1008CA and 15-DW2017CA, plus 15T-DW000 and 15T-DW100 — the touch builds that shipped with this panel
- Panel: TN LCD with an on-cell touch layer, glossy BrightView finish, slim panel, no brackets
- Testing: every unit is double tested before shipping — display, touch and fitment
Technical Specifications
| Item | Detail |
|---|---|
| Part number | L52001-001 — also published as L63569-001 and L29687-001 |
| Manufacturer description string | LCD RAW PANEL 15.6 HD BV SVA 220 TOP — BV is BrightView (glossy), 220 is the brightness in nits, TOP is touch-on-panel |
| Screen size | 15.6 inches diagonal (active area 344.232 x 193.536 mm) |
| Resolution | 1366 x 768 px (WXGA HD), 100 ppi, 16:9 |
| Refresh rate | 60 Hz |
| Panel technology | a-Si TFT-LCD, TN, normally white, transmissive |
| Brightness | 220 cd/m² (typical) |
| Finish | Glossy (BrightView), hard coating 3H |
| Touch | On-cell touch, bonded inside the panel — no separate digitizer board and no touch flex cable |
| Signal interface | eDP 2 lanes, eDP 1.2, HBR1 (2.7G/lane), 40-pin, 3.3 V |
| Connector position | Bottom right, viewed from the back of the screen, 0.5 mm pitch |
| Mounting | Slim panel with no tabs and no brackets — the bezel and the hinge brackets already fitted to the machine stay in place |
| NOT compatible with | The HD non-touch panel (L52000-001), the HD anti-glare non-touch panel (L51999-001), the FHD non-touch panels (L51997-001 and L51998-001) and the FHD touch panel (L52156-001) — same 15.6 inch size, same machines, different electronics and different connector |
| Condition | Brand-new, unassembled |
| Quality | iProGadgets OEM Quality |
Compatibility
| Device | Model numbers / part codes |
|---|---|
| For HP 15-dw | 15-dw0000 · 15-dw1000 · 15-dw2000 · 15-dw3000 · 15-dw4000 |
| For HP 15T-dw (touch builds) | 15T-DW000 · 15T-DW100 |
| Named models | 15-DW0043DX · 15-DW0008CA · 15-DW0009CA · 15-DW0010DS · 15-DW0011DS · 15-DW0025CL · 15-DW0030NR · 15-DW0034WM · 15-DW0035CL · 15-DW0036WM · 15-DW0038WM · 15-DW0050OD · 15-DW0085NR · 15-DW1008CA · 15-DW2017CA · 15-DW2025CL · 15-DW3013DX |
| Also published for these families — send us the panel code from your label first | 15-dy · 15-gw · 15z-gw · 15s-du · 15s-fq · 15s-eq · 15-ef |
| NOT these machines | The 15.6 inch non-touch builds of the same chassis (30-pin), and the FHD touch build, which uses a different panel |
Before We Ship — Please Send Us These 3 Details
Laptop, all-in-one and desktop PC screens can differ between revisions of the same model, so the listing alone cannot always tell us which panel is inside your machine. After you place the order we will contact you for the three items below — please send them so we can confirm the fitment and ship the correct, fully compatible screen straight away:
- A photo of your computer. A clear photo of the laptop itself, plus the model / service label on the bottom cover (or the model name shown in Settings → About).
- Touch or non-touch, resolution and refresh rate. Tell us whether your screen is a touch screen or a non-touch screen, its resolution, and its refresh rate in Hz. If you are not sure, just send the model number and we will check it for you.
- Photos of your old screen. Once the machine is opened, a full photo of the back of the old screen and a close-up of the label or barcode sticker on it. That label carries the exact panel part number, which removes any doubt about which screen you need.
We check your photos against our stock before dispatch. If something does not match, we will contact you first instead of sending a part that may not fit. Once your details are confirmed, we arrange shipment within 1 to 3 business days. Thank you for helping us get it right.
Installation Notes
- Clean the flex cable with alcohol before installation and confirm that it is well connected.
- Do not pull, tear or push on the flex cable, be careful during installation.
- Before installing the screen, please remove the battery in advance.
- Please tap the screen carefully, because the screen is too fragile to damage.
Quality Control
Strictly tested by the iProGadgets QC Team — every unit is double tested before shipping and ships in good working order. After receiving the part, please check the appearance and test it first: connect the new part to the motherboard for a functional test before full installation, and only install once everything works. We are not responsible for any installation mistakes — if you are not experienced with screen replacement, have the part fitted by a professional repair shop.
Shipping
We ship worldwide. Orders are dispatched within 1 to 3 business days, and every package carries a tracking number you can follow on the order page. Delivery typically takes 7 to 10 days after dispatch.
Returns & Warranty
30-day returns on unused, uninstalled parts. The warranty is valid until installed — once a screen has been fitted, the return window no longer applies, which is why we ask you to test before installation.
FAQs
Is this the touch panel or the non-touch panel?
This is the 40-pin glossy HD touch panel — the touch layer is bonded inside the panel, so there is no separate digitizer to fit. The same chassis shipped with four other panels: the HD non-touch panel (L52000-001 — one digit away from this one), the HD anti-glare non-touch panel (L51999-001), the FHD non-touch panels (L51997-001, L51998-001) and the FHD touch panel (L52156-001). They are the same size and look identical from the front, so the label is the only reliable way to tell them apart. Read the part number printed on the label on the back of the screen you are removing and send it to us — we will confirm which one you need before dispatch.
How do I confirm the connector before ordering?
Turn the screen over and look at where the flat cable plugs in. On this panel the connector is at the bottom right and carries 40 pins at 0.5 mm pitch. If your connector has 30 pins, your machine is a non-touch build and this panel will not work — a 30-pin screen cannot drive the touch layer, and the connector will not seat. If you cannot see the pin count clearly, send us a close-up photo of the connector and we will read it for you.
My machine is a 15-dy, 15s-du or 15-ef — will this fit?
Those families are often grouped together with the 15-dw, because they draw on the same display-panel list and several of them take this same panel. We only promise the fit on the 15-dw and 15T-dw machines listed above, so if your model starts 15-dy, 15-gw, 15z-gw, 15s-du, 15s-fq, 15s-eq or 15-ef, send us the panel code from the label on your screen before you order and we will tell you honestly whether this is the part you need.
Does the panel come with a digitizer board or a touch flex cable?
No — and it does not need one. The touch layer is built into this panel, so there is no separate digitizer and no touch flex in the box. If your machine has a separate digitizer board and the screen shows an image but the touch does not respond, the fault may be in that board or its cable rather than in the panel. Tell us what you are seeing before you order and we will help you work out which part has failed.
Questions about fit, shipping to your country, or bulk pricing? Email sales@iProGadget.com and we will confirm the exact part you need.
Frequently Asked Questions
Is this part compatible with my device?
This listing is for Replacement LCD Touch Screen Display For HP 15-DW 15T-DW 15-DW0043DX L52001-001 15.6 inch HD Panel. It is built as a direct-fit replacement for the model named in the title. Match the model number in the title against your own device before ordering. If you are not sure which version you need, email sales@iProGadget.com and we will confirm the correct part for you.
What is the quality of these replacement parts?
We supply iProGadgets OEM Quality / Premium Compatible replacement parts. Every part is manufactured to OEM specifications, so the fit, finish and function match the original component it replaces, and each unit is individually tested before it leaves our warehouse.
Is the part tested before it is shipped?
Yes. Every part we sell is inspected before dispatch and tested wherever testing applies — screen assemblies are checked on the panel, the touch response and the connector. Orders are processed and shipped within 1-3 business days after payment is confirmed.
How long does shipping take?
Orders leave our warehouse within 1-3 business days. Express Shipping (DHL, UPS or FedEx) takes 5-8 working days and is normally used for parcels over 2 kg. Registered Air Post takes 10-20 working days and is normally used for parcels under 2 kg. Every order ships with a tracking number. Customs clearance can add extra time, especially during peak season.
Will I be charged import duties or customs fees?
Customs charges depend on your own country's import rules and its de minimis threshold, not on the seller. Some destinations apply no duty at all on lower-value parcels, and where duty or VAT does apply it is collected by your local post office or courier before delivery. We ship every order with complete and accurate commercial documents, which is what keeps a parcel moving through customs instead of sitting in it. If you would like to estimate the charges before you order, email us your country and we will point you to the right authority.
What is your return policy?
We offer a 30-day return policy, which means you can request a return within 30 days of receiving your item. To be eligible, the item must be unused, uninstalled and in the packaging it arrived in. Once a part has been fitted, bonded or used it cannot be returned, so please test the part before installation. To start a return, email sales@iProGadget.com.
What should I do if the part arrives damaged or faulty?
Inspect your order as soon as it arrives. If an item is defective, damaged or not what you ordered, contact us at sales@iProGadget.com straight away with photos or a short unboxing video, and we will arrange a replacement or a refund.
Do you provide repair guides or installation tutorials?
No. We are a supplier of replacement parts only. We are not a repair shop, and we do not provide repair guides, tutorials or step-by-step installation support. Every part we sell is intended to be installed by a professional technician at a qualified repair shop, which also gives the best result: a technician can transfer the small components, handle the adhesives and test the finished repair. Please do not attempt the installation yourself if you have no previous repair experience, as these assemblies are fragile and incorrect handling can damage them permanently. We sell parts only and do not accept responsibility for installation carried out by the customer. Our warranty covers the part itself and remains valid until the part is installed. If a problem appears after the repair, please take the device back to the repair shop that fitted the part so they can inspect the installation and test the device.
Still have a question about this part? Email us at sales@iProGadget.com and we will confirm compatibility, shipping time or return details for you.
