Replacement LCD Screen Display For NV156FHM-T01 V8.0 15.6 inch FHD Touch Panel
iProGadgets OEM Repair Parts for NV156FHM-T01 V8.0 15.6 inch FHD Touch Laptop Screen Replacement — Quick Answers
Quick answer: this is a brand-new 15.6 inch Full HD on-cell touch replacement LCD panel coded NV156FHM-T01 V8.0 — 1920 x 1080 at 60 Hz on a 40-pin eDP connector, glossy front with no mounting brackets, 250 cd/m² and 800:1, the touch layer built into the panel cell and reporting over USB. Two things decide this order: the panel has to be the touch build, and it has to be Full HD. The version suffix matters here: this family runs from T00 to T11 and the versions are not all the same brightness, so send us the full string from your label. We list this panel both by its panel code and, separately, by machine and spare part number under L25333-001. If you arrived here from a machine search, send us the code printed on the label of the screen you are removing and we will match it.
- Fit: The 15.6 inch Full HD touch panel coded NV156FHM-T01 V8.0 — the glossy on-cell touch screen on a 40-pin eDP connector
- Panel: a-Si TFT-LCD wide-viewing-angle panel (ADS, an IPS-class technology), on-cell self-capacitive touch built into the cell and reporting over USB, glare front with a 3H hard coating, no mounting brackets, 250 cd/m², 800:1, 350.66 x 216.15 mm
- Testing: every unit is double tested before shipping — display, touch and fitment
Technical Specifications
| Item | Detail |
|---|---|
| Panel code | NV156FHM-T01 V8.0. The version suffix is part of the code — this family is catalogued from T00 through T11, and the members are not all the same brightness, so read the full string from the label of the screen you are removing |
| Screen size | 15.6 inches diagonal (39.6 cm), 16:9 |
| Resolution | 1920 x 1080 px (Full HD), 141 PPI |
| Refresh rate | 60 Hz |
| Panel technology | a-Si TFT-LCD, an IPS-class wide-viewing-angle panel recorded as ADS, normally black, transmissive, WLED edge-lit backlight with the driver on the panel board, 262K colours (6-bit) at 45% NTSC, eDP 1.2 at 2.7 G per lane |
| Touch | Yes — capacitive multi-touch, built into the panel cell. There is no separate digitizer glass plate to transfer from your old screen, so the touch layer arrives with the panel and works as soon as the machine is assembled. Test it before final assembly: a weak digitizer board or a damaged display cable is the usual cause of ghost touch, dead zones or inverted touch, so please check that cable and board rather than concluding the panel is faulty. On this panel the touch controller is a self-capacitive sensor driving ten touch points and reporting over USB, so the touch signal travels in the same 40-pin plug as the picture |
| Brightness | 250 cd/m² typical |
| Contrast ratio | 800:1 typical |
| Surface finish | Gloss, also written Glare (Haze 0%), with a 3H hard coating. One supplier catalogue describes this spare part as matte; every panel record quoted against this code prints a gloss front, so order on the understanding that this is the glossy screen. The anti-glare narrow-bezel Full HD sibling is a different part number |
| Signal interface | eDP, 40-pin connector about 25 mm across, 3.3 V. On this machine the one plug carries the display signal, the backlight supply, the dimming control and the USB touch signal together — which is why a standard 30-pin 15.6 inch panel cannot be connected here at all. Count the contacts on the flex of the screen you are removing before ordering |
| Connector position | Bottom right, viewed from the back of the panel |
| Outline dimensions | 350.66 mm wide x 216.15 mm high, 3.2 mm thick at the panel and 3.4 mm over the driver board; active area 344.16 x 193.59 mm; mass 385 g |
| Mounting | No brackets — this slim panel is held by adhesive, not screws. The bezel adhesive and the rear cover adhesive are part of what the factory spare covers, and we supply the panel on its own, so have fresh adhesive tape ready before you start |
| Same spare part, other panel codes | B156HAK02.1 and LP156WFD(SP)(L1) are quoted by suppliers as the panel inside the very same spare part as NV156FHM-T01 V8.0. They agree on 15.6 inches, 1920 x 1080, a 40-pin eDP connector at the bottom right, a gloss front and no brackets, and one distributor prints this code and NV156FHM-T01 V8.0 on the same product line against L25333-001 — so we treat them as one purchase with more than one catalogue name, not as different products. We do not promise which of them is in your machine; read the code off the label of the screen you are removing and send it to us |
| NOT the non-touch panel | L25334-001 is the same 15.6 inch Full HD panel WITHOUT touch, one digit away from L25333-001, and L47710-001 is the anti-glare narrow-bezel build without touch. A non-touch panel cannot be used in a touch machine: the touch layer lives inside the cell, so the screen would light up but nothing would respond to your finger |
| NOT the HD touch panel | L25330-001 is the glossy touch panel for the same series at a lower HD resolution, and L25331-001 / L25332-001 / L25335-001 / L25336-001 are the other anti-glare builds. All of them share the same 15.6 inch frame and the same 40-pin connector, so a photo alone will not separate them — a 1366 x 768 machine will not show a correct picture on a 1920 x 1080 panel, and the other way round |
| NOT a whole display assembly | This is the screen panel on its own — no display bezel, no rear cover, no hinges and no camera module. If you need the complete display assembly or the bezel, tell us before ordering |
| Condition | Brand-new, unassembled |
| Quality | iProGadgets OEM Quality |
Compatibility
| Device | Model numbers / part codes |
|---|---|
| Panel code covered — this listing | NV156FHM-T01 V8.0 |
| Same spare part, other panel codes | B156HAK02.1 and LP156WFD(SP)(L1), listed on their own as well as here |
| Same panel family, listed by code | We also sell this panel family as separate panel-code entries — B156HAK02.2, B156HAK02.0, B156HAK02.3, B156HAK02.H and the LP156WFD-SPH / -SPK variants ,They describe the same physical screen, so a search on any one code can turn up more than one result; send us the code from your label and we will confirm which one we are shipping |
| NOT the non-touch panel | L25334-001 (Full HD, no touch) and L47710-001 (anti-glare narrow bezel, no touch) do not fit a touch machine and are not interchangeable with this panel |
| NOT the HD panel | L25330-001, L25331-001, L25332-001, L25335-001 and L25336-001 are the other builds for this series on the same 40-pin connector — a different resolution, not a substitute |
Before We Ship — Please Send Us These 3 Details
Laptop, all-in-one and desktop PC screens can differ between revisions of the same model, so the listing alone cannot always tell us which panel is inside your machine. After you place the order we will contact you for the three items below — please send them so we can confirm the fitment and ship the correct, fully compatible screen straight away:
- A photo of your computer. A clear photo of the laptop itself, plus the model / service label on the bottom cover (or the model name shown in Settings → About).
- Touch or non-touch, resolution and refresh rate. Tell us whether your screen is a touch screen or a non-touch screen, its resolution, and its refresh rate in Hz. If you are not sure, just send the model number and we will check it for you.
- Photos of your old screen. Once the machine is opened, a full photo of the back of the old screen and a close-up of the label or barcode sticker on it. That label carries the exact panel part number, which removes any doubt about which screen you need.
We check your photos against our stock before dispatch. If something does not match, we will contact you first instead of sending a part that may not fit. Once your details are confirmed, we arrange shipment within 1 to 3 business days. Thank you for helping us get it right.
Installation Notes
- Clean the flex cable with alcohol before installation and confirm that it is well connected.
- Do not pull, tear or push on the flex cable, be careful during installation.
- Before installing the screen, please remove the battery in advance.
- Please tap the screen carefully, because the screen is too fragile to damage.
Quality Control
Strictly tested by the iProGadgets QC Team — every unit is double tested before shipping and ships in good working order. After receiving the part, please check the appearance and test it first: connect the part to the motherboard for a functional test before full installation, and only install once everything works. We are not responsible for any installation mistakes — if you are not experienced with screen replacement, have the part fitted by a professional repair shop.
Shipping
We ship worldwide. Orders are dispatched within 1 to 3 business days, and every package carries a tracking number you can follow on the order page. Delivery typically takes 7 to 10 days after dispatch.
Returns & Warranty
30-day returns on unused, uninstalled parts. The warranty is valid until installed — once a screen has been fitted, the return window no longer applies, which is why we ask you to test before installation.
FAQs
How do I check that NV156FHM-T01 V8.0 is the screen I need?
Open the machine, lay the screen face down and read the barcode label on the back of the panel. This listing answers for the code NV156FHM-T01 V8.0 and for the other panel codes quoted against it, and it should be 1920 x 1080, 15.6 inches, a glossy front and a 40-pin connector at the bottom right, with no screw tabs anywhere on the frame. If the label carries a different number, or the panel you are removing is not Full HD, send us a photo of that label and we will tell you honestly which part you need instead of shipping the wrong screen.
Does the V8.0 suffix matter, and are the other NV156FHM-T numbers the same panel?
The suffix is part of the model name, so send us the whole string. The family is catalogued from T00 through T11 and they are not all the same screen — most are 250 cd/m² at 800:1, but some members are 220 cd/m², and others are brighter at 300 cd/m², and the colour depth differs between members. They share the 15.6 inch Full HD size and the 40-pin touch connector, so a member with a different brightness will still fit and work, but it will not look identical to the screen it replaces. Tell us the code on your label and we will match it as closely as we can.
Is this screen glossy or matte?
It is the glossy screen. The panel datasheet records a glare front with a 3H hard coating, and the touch sensor sits on the cell under that front glass. If you need an anti-glare panel, that is a different part and we will point you at it.
Will the touch work straight away, and what if it does not?
Yes — the touch layer is built into the panel cell, so it arrives with the screen and no separate digitizer glass has to be transferred. Fit the panel, reconnect the display cable and test touch before you close the machine up. If touch misbehaves — ghost touches, dead strips, inverted response — the usual causes are the display cable not seated properly or a weakened digitizer board on the machine, so check those two first. Still faulty, and contact us: we test every unit before it ships and we will sort it out.
Questions about fit, shipping to your country, or bulk pricing? Email sales@iProGadget.com and we will confirm the exact part you need.
Frequently Asked Questions
Is this part compatible with my device?
This listing is for Replacement LCD Screen Display For NV156FHM-T01 V8.0 15.6 inch FHD Touch Panel. It is built as a direct-fit replacement for the model named in the title. Match the model number in the title against your own device before ordering. If you are not sure which version you need, email sales@iProGadget.com and we will confirm the correct part for you.
What is the quality of these replacement parts?
We supply iProGadgets OEM Quality / Premium Compatible replacement parts. Every part is manufactured to OEM specifications, so the fit, finish and function match the original component it replaces, and each unit is individually tested before it leaves our warehouse.
Is the part tested before it is shipped?
Yes. Every part we sell is inspected before dispatch and tested wherever testing applies — screen assemblies are checked on the panel, the touch response and the connector. Orders are processed and shipped within 1-3 business days after payment is confirmed.
How long does shipping take?
Orders leave our warehouse within 1-3 business days. Express Shipping (DHL, UPS or FedEx) takes 5-8 working days and is normally used for parcels over 2 kg. Registered Air Post takes 10-20 working days and is normally used for parcels under 2 kg. Every order ships with a tracking number. Customs clearance can add extra time, especially during peak season.
Will I be charged import duties or customs fees?
Customs charges depend on your own country's import rules and its de minimis threshold, not on the seller. Some destinations apply no duty at all on lower-value parcels, and where duty or VAT does apply it is collected by your local post office or courier before delivery. We ship every order with complete and accurate commercial documents, which is what keeps a parcel moving through customs instead of sitting in it. If you would like to estimate the charges before you order, email us your country and we will point you to the right authority.
What is your return policy?
We offer a 30-day return policy, which means you can request a return within 30 days of receiving your item. To be eligible, the item must be unused, uninstalled and in the packaging it arrived in. Once a part has been fitted, bonded or used it cannot be returned, so please test the part before installation. To start a return, email sales@iProGadget.com.
What should I do if the part arrives damaged or faulty?
Inspect your order as soon as it arrives. If an item is defective, damaged or not what you ordered, contact us at sales@iProGadget.com straight away with photos or a short unboxing video, and we will arrange a replacement or a refund.
Do you provide repair guides or installation tutorials?
No. We are a supplier of replacement parts only. We are not a repair shop, and we do not provide repair guides, tutorials or step-by-step installation support. Every part we sell is intended to be installed by a professional technician at a qualified repair shop, which also gives the best result: a technician can transfer the small components, handle the adhesives and test the finished repair. Please do not attempt the installation yourself if you have no previous repair experience, as these assemblies are fragile and incorrect handling can damage them permanently. We sell parts only and do not accept responsibility for installation carried out by the customer. Our warranty covers the part itself and remains valid until the part is installed. If a problem appears after the repair, please take the device back to the repair shop that fitted the part so they can inspect the installation and test the device.
Still have a question about this part? Email us at sales@iProGadget.com and we will confirm compatibility, shipping time or return details for you.
