Replacement LCD Screen Display For NT133WHM-N45 N35 N38 N46 N47 13.3 inch HD Panel
iProGadgets OEM Repair Parts for NT133WHM-N45 N35 N38 N46 N47 13.3 inch HD Laptop Screen Replacement — Quick Answers
Quick answer: this is a brand-new 13.3 inch non-touch replacement LCD panel for the NT133WHM screen family — the codes NT133WHM-N45, NT133WHM-N35, NT133WHM-N38, NT133WHM-N46 and NT133WHM-N47 — 1366 x 768 HD at 60 Hz on a 30-pin eDP connector, double tested before shipping and covered by a 30-day return window on unused, uninstalled parts. Please read this before you order. These five codes share the same screen size and the same resolution, but they are not all the same part: the NT133WHM-N45, NT133WHM-N35 and NT133WHM-N47 revisions sit on one slim bracketless footprint and interchange, the NT133WHM-N46 revision uses a wider frame that carries mounting ears top and bottom, and no maker datasheet could be found for the NT133WHM-N38 suffix at all. Send us the full code from the label on the screen you are removing and we will confirm which revision we are shipping before dispatch.
- Fit: The NT133WHM panel family — codes NT133WHM-N45, NT133WHM-N35, NT133WHM-N38, NT133WHM-N46 and NT133WHM-N47 — a display-only panel, no touch layer and no brackets fitted
- Panel: TN LCD, matte anti-glare, slim bracketless panel on the N45, N35 and N47 revisions
- Testing: every unit is double tested before shipping — display, touch and fitment
Technical Specifications
| Item | Detail |
|---|---|
| Panel model codes | NT133WHM-N45 · NT133WHM-N35 · NT133WHM-N38 · NT133WHM-N46 · NT133WHM-N47 |
| Screen size | 13.3 inches diagonal (33.8 cm), 16:9 |
| Resolution | 1366 x 768 px (WXGA HD), 118 ppi |
| Refresh rate | 60 Hz |
| Panel technology | a-Si TFT-LCD, TN, normally white, transmissive — matte anti-glare surface with hard coating 3H, WLED edge-lit backlight with an LED driver board on the panel |
| Brightness | 220 cd/m² typical. The NT133WHM-N47 revision is rated 250 cd/m², so a small brightness difference between revisions is expected rather than a fault |
| Touch | Non-touch, display-only panel. Touch builds of these machines take a separate bonded assembly instead of this bare panel |
| Signal interface | eDP 1.2, 1 lane, 30-pin FPC, 3.3 V |
| Connector position | Bottom right, viewed from the back of the panel |
| Mounting | Bracketless slim panel (PCBA flat type, up to 3.0 mm) on the N45, N35 and N47 revisions — the bezel and the hinge brackets already fitted in the machine stay in place |
| NOT NT133WHM-N46 | The N46 revision measures 306.3 x 195.2 mm and carries eight mounting ears top and bottom, against 300.26 x 187.95 mm for this panel — a wider frame, so do not order it on the strength of the shared size |
| NOT NT133WHM-N22 / N48 / N61 | Same family and the same resolution, different outline — the N22 is 314.1 mm wide and the N61 is 4.5 mm thick, so neither drops into this frame |
| Unconfirmed code NT133WHM-N38 | No maker datasheet for this suffix could be located, so we will not quote an outline or a driver for it. Send us the code printed on your own label and we will confirm the match before dispatch |
| Condition | Brand-new, unassembled |
| Quality | iProGadgets OEM Quality |
Compatibility
| Device | Model numbers / part codes |
|---|---|
| Panel codes that share this footprint | NT133WHM-N35 · NT133WHM-N47 · N133BGA-EA2 · N133BGE-EAA · N133BGE-EB1 · N133BGG-EA1 |
| Panel codes in the same family with a different frame | NT133WHM-N46 (wider, eight mounting ears) · NT133WHM-N22 (314.1 mm wide) · NT133WHM-N48 · NT133WHM-N61 (4.5 mm thick) |
| NOT these machines | The 14 inch ProBook 440 G6 and the 15.6 inch ProBook 450 G6 — different panel sizes and different part numbers. Send us the code from your label and we will tell you honestly whether this is the part you need |
Before We Ship — Please Send Us These 3 Details
Laptop, all-in-one and desktop PC screens can differ between revisions of the same model, so the listing alone cannot always tell us which panel is inside your machine. After you place the order we will contact you for the three items below — please send them so we can confirm the fitment and ship the correct, fully compatible screen straight away:
- A photo of your computer. A clear photo of the laptop itself, plus the model / service label on the bottom cover (or the model name shown in Settings → About).
- Touch or non-touch, resolution and refresh rate. Tell us whether your screen is a touch screen or a non-touch screen, its resolution, and its refresh rate in Hz. If you are not sure, just send the model number and we will check it for you.
- Photos of your old screen. Once the machine is opened, a full photo of the back of the old screen and a close-up of the label or barcode sticker on it. That label carries the exact panel part number, which removes any doubt about which screen you need.
We check your photos against our stock before dispatch. If something does not match, we will contact you first instead of sending a part that may not fit. Once your details are confirmed, we arrange shipment within 1 to 3 business days. Thank you for helping us get it right.
Installation Notes
- Clean the flex cable with alcohol before installation and confirm that it is well connected.
- Do not pull, tear or push on the flex cable, be careful during installation.
- Before installing the screen, please remove the battery in advance.
- Please tap the screen carefully, because the screen is too fragile to damage.
Quality Control
Strictly tested by the iProGadgets QC Team — every unit is double tested before shipping and ships in good working order. After receiving the part, please check the appearance and test it first: connect the part to the motherboard for a functional test before full installation, and only install once everything works. We are not responsible for any installation mistakes — if you are not experienced with screen replacement, have the part fitted by a professional repair shop.
Shipping
We ship worldwide. Orders are dispatched within 1 to 3 business days, and every package carries a tracking number you can follow on the order page. Delivery typically takes 7 to 10 days after dispatch.
Returns & Warranty
30-day returns on unused, uninstalled parts. The warranty is valid until installed — once a screen has been fitted, the return window no longer applies, which is why we ask you to test before installation.
FAQs
Which of these five panel codes do I actually have?
Read the label on the back of the screen you are removing — it carries the full code, including the number after the hyphen. All five codes in this listing are 13.3 inch, 1366 x 768, 30-pin eDP and non-touch, so the front of the panel looks the same across the family and the label is the only reliable way to tell them apart. The NT133WHM-N45, NT133WHM-N35 and NT133WHM-N47 revisions share one slim bracketless footprint and interchange with each other. If the print is too small to read, send us a close-up photo of the label and we will identify it for you.
Is the NT133WHM-N46 interchangeable with the NT133WHM-N45?
Not on trust. The N46 is a different mechanical part: it measures 306.3 x 195.2 mm against 300.26 x 187.95 mm for this panel, and it carries eight mounting ears top and bottom, while the N45, N35 and N47 revisions are supplied bracketless. That wider frame will not drop into the same opening. We list the N46 revision separately for that reason — order by the code on your own label, or send us the photo and we will tell you honestly which revision you need.
Is this the touch version or the non-touch version?
This is the non-touch display-only panel — the screen on its own, with no touch layer or digitizer bonded to it. Touch and non-touch screens for the same machine are different assemblies and do not interchange, so please check before ordering: if the screen you are removing responds to finger or stylus input, send us your machine model and the code from the label and we will confirm the right part for you.
Questions about fit, shipping to your country, or bulk pricing? Email sales@iProGadget.com and we will confirm the exact part you need.
Frequently Asked Questions
Is this part compatible with my device?
This listing is for Replacement LCD Screen Display For NT133WHM-N45 N35 N38 N46 N47 13.3 inch HD Panel. It is built as a direct-fit replacement for the model named in the title. Match the model number in the title against your own device before ordering. If you are not sure which version you need, email sales@iProGadget.com and we will confirm the correct part for you.
What is the quality of these replacement parts?
We supply iProGadgets OEM Quality / Premium Compatible replacement parts. Every part is manufactured to OEM specifications, so the fit, finish and function match the original component it replaces, and each unit is individually tested before it leaves our warehouse.
Is the part tested before it is shipped?
Yes. Every part we sell is inspected before dispatch and tested wherever testing applies — screen assemblies are checked on the panel, the touch response and the connector. Orders are processed and shipped within 1-3 business days after payment is confirmed.
How long does shipping take?
Orders leave our warehouse within 1-3 business days. Express Shipping (DHL, UPS or FedEx) takes 5-8 working days and is normally used for parcels over 2 kg. Registered Air Post takes 10-20 working days and is normally used for parcels under 2 kg. Every order ships with a tracking number. Customs clearance can add extra time, especially during peak season.
Will I be charged import duties or customs fees?
Customs charges depend on your own country's import rules and its de minimis threshold, not on the seller. Some destinations apply no duty at all on lower-value parcels, and where duty or VAT does apply it is collected by your local post office or courier before delivery. We ship every order with complete and accurate commercial documents, which is what keeps a parcel moving through customs instead of sitting in it. If you would like to estimate the charges before you order, email us your country and we will point you to the right authority.
What is your return policy?
We offer a 30-day return policy, which means you can request a return within 30 days of receiving your item. To be eligible, the item must be unused, uninstalled and in the packaging it arrived in. Once a part has been fitted, bonded or used it cannot be returned, so please test the part before installation. To start a return, email sales@iProGadget.com.
What should I do if the part arrives damaged or faulty?
Inspect your order as soon as it arrives. If an item is defective, damaged or not what you ordered, contact us at sales@iProGadget.com straight away with photos or a short unboxing video, and we will arrange a replacement or a refund.
Do you provide repair guides or installation tutorials?
No. We are a supplier of replacement parts only. We are not a repair shop, and we do not provide repair guides, tutorials or step-by-step installation support. Every part we sell is intended to be installed by a professional technician at a qualified repair shop, which also gives the best result: a technician can transfer the small components, handle the adhesives and test the finished repair. Please do not attempt the installation yourself if you have no previous repair experience, as these assemblies are fragile and incorrect handling can damage them permanently. We sell parts only and do not accept responsibility for installation carried out by the customer. Our warranty covers the part itself and remains valid until the part is installed. If a problem appears after the repair, please take the device back to the repair shop that fitted the part so they can inspect the installation and test the device.
Still have a question about this part? Email us at sales@iProGadget.com and we will confirm compatibility, shipping time or return details for you.
