Replacement LCD Screen Display For N140BGA-EB4 Rev.C1 14.0 inch HD 1366x768 30 Pin Panel
iProGadgets OEM Repair Parts for N140BGA-EB4 Rev.C1 14.0 inch HD 1366x768 30 Pin Laptop Screen Replacement — Quick Answers
Quick answer: this is the no-bracket version of the N140BGA-EB4 Rev.C1 display panel — 14.0″, LCD, 1366 x 768 px (WXGA HD), 60 Hz, 30-pin eDP with the connector at the bottom right, matte, non-touch, double tested before shipping and backed by a 30-day return window on unused, uninstalled parts. This panel is supplied without mounting brackets or screw holes. The same panel code also exists in a with-brackets version — if your screen has small metal tabs along its top and bottom edges, you need that other version, so please check before ordering.
- Fit: Compatible with laptops that use the no-bracket 14.0″ WXGA panel — including HP Pavilion 14-ce0504sa, HP 14-dk1002ni, HP 245 G10, Dell Vostro 3400 and ASUS X409FA. Also fits machines that shipped with the AUO, BOE or HKC equivalents listed below
- Panel: TN LCD, non-touch, matte, no mounting brackets
- Testing: every unit is double tested before shipping — display, backlight and fitment
Technical Specifications
| Item | Detail |
|---|---|
| Panel model | N140BGA-EB4 Rev.C1 (Innolux) |
| Screen size | 14.0 inches diagonal (315 mm wide) |
| Resolution | 1366 x 768 px (WXGA HD) |
| Refresh rate | 60Hz |
| Aspect ratio | 16:9 |
| Surface | Matte (anti-glare) |
| Backlight | LED (Light Emitting Diode), DIODE lamp |
| Signal interface | eDP, 30-pin, connector at BOTTOM RIGHT |
| Connector position | Bottom right, viewed from the back of the screen |
| Frame profile | Slim (thin profile) |
| Mounting brackets | NONE — this version has no brackets and no screw holes |
| Panel dimensions | 315 x 197.53 mm (185 mm excluding the bottom circuit board) |
| Touch | Display-only panel (no touch layer) |
| AUO equivalent part numbers | B140XTN07.2, B140XTN07.3 |
| For BOE equivalent part numbers | NT140WHM-N44, NT140WHM-N43 V8.0, NT140WHM-N43 V8.3, NT140WHM-N34, NT140WHM-N46, NT140WHM-N49 V8.0, NT140WHM-N51, NT140WHM-N61 |
| For HKC equivalent part numbers | MB140AN01-1, MB140AN01-2, MB140AN01-5, MB140AN01-9, MB140AN01 V1.0 |
| Other cross-referenced codes | L19200-001, M02093-R91, N35730-001, PRWRT, LQ140T1JH01 |
| NOT the with-brackets version | A version of this same panel exists with top and bottom mounting brackets — that one is a different item and is not covered by this listing |
| Condition | Brand-new, unassembled |
| Quality | iProGadgets OEM Quality |
Compatibility
| Device | Model numbers / part codes |
|---|---|
| For HP Pavilion / HP laptops | 14-ce0504sa, 14-dk1002ni, 245 G10 |
| For Dell / ASUS | Vostro 3400, X409FA |
| Also replaces the equivalent AUO / BOE / HKC panels listed above | B140XTN07.2, B140XTN07.3, NT140WHM-N34/N43/N44/N46/N49/N51/N61, MB140AN01 series |
Before We Ship — Please Send Us These 3 Details
Laptop, all-in-one and desktop PC screens can differ between revisions of the same model, so the listing alone cannot always tell us which panel is inside your machine. After you place the order we will contact you for the three items below — please send them so we can confirm the fitment and ship the correct, fully compatible screen straight away:
- A photo of your computer. A clear photo of the laptop itself, plus the model / service label on the bottom cover (or the model name shown in Settings → About).
- Touch or non-touch, resolution and refresh rate. Tell us whether your screen is a touch screen or a non-touch screen, its resolution, and its refresh rate in Hz. If you are not sure, just send the model number and we will check it for you.
- Photos of your old screen. Once the machine is opened, a full photo of the back of the old screen and a close-up of the label or barcode sticker on it. That label carries the exact panel part number, which removes any doubt about which screen you need.
We check your photos against our stock before dispatch. If something does not match, we will contact you first instead of sending a part that may not fit. Once your details are confirmed, we arrange shipment within 1 to 3 business days. Thank you for helping us get it right.
Installation Notes
- Clean the flex cable with alcohol before installation and confirm that it is well connected.
- Do not pull, tear or push on the flex cable, be careful during installation.
- Before installing the screen, please remove the battery in advance.
- Please tap the screen carefully, because the screen is too fragile to damage.
Quality Control
Strictly tested by the iProGadgets QC Team — every unit is double tested before shipping and ships in good working order. After receiving the part, please check the appearance and test it first: connect the new part to the motherboard for a functional test before full installation, and only install once everything works. We are not responsible for any installation mistakes — if you are not experienced with screen replacement, have the part fitted by a professional repair shop.
Shipping
We ship worldwide. Orders are dispatched within 1 to 3 business days, and every package carries a tracking number you can follow on the order page. Delivery typically takes 7 to 10 days after dispatch.
Returns & Warranty
30-day returns on unused, uninstalled parts. The warranty is valid until installed — once a screen has been fitted, the return window no longer applies, which is why we ask you to test before installation.
FAQs
How do I tell whether I need the no-bracket or the with-bracket version?
Look at the edges of your current screen. If it has small metal tabs or screw holes along the top and bottom edges, it is the with-brackets version and this listing will not hold it correctly. If the edges are plain with no tabs, this is the right one. Turn the screen over and check before ordering — if you are unsure, send us a photo of the back of the screen and we will confirm.
Is this screen also known by other part numbers?
Yes. The same physical panel is sold by different manufacturers under their own codes, and all of them share this listing's size, resolution, connector and fitment: B140XTN07.2 and B140XTN07.3 (AUO), the NT140WHM-N34 / N43 / N44 / N46 / N49 / N51 / N61 family (BOE), and the MB140AN01 series (HKC). If any of those is printed on your screen label, this panel fits. Parts with mounting brackets are a different item — check the edge description above.
Is this a touch screen?
No. This is the non-touch display panel only, with no touch layer or digitizer bonded on. If your current screen responds to finger or pen input, this is not the right part — send us the part number from the label on the back of your screen and we will tell you what you need.
Does the panel include the bezel, brackets, screws or the eDP cable?
The bare slim panel only — no bezel, no brackets, no screws, no cable. The eDP cable is not included because on most repairs it stays with the machine and is undamaged. If you need a cable or a bezel, send us a photo of your machine's screen area and we will tell you which additional parts fit.
Questions about fit, shipping to your country, or bulk pricing? Email sales@iProGadget.com and we will confirm the exact part you need.
Frequently Asked Questions
Is this part compatible with my device?
This listing is for Replacement LCD Screen Display For N140BGA-EB4 Rev.C1 14.0 inch HD 1366x768 30 Pin Panel. It is built as a direct-fit replacement for the model named in the title. Match the model number in the title against your own device before ordering. If you are not sure which version you need, email sales@iProGadget.com and we will confirm the correct part for you.
What is the quality of these replacement parts?
We supply iProGadgets OEM Quality / Premium Compatible replacement parts. Every part is manufactured to OEM specifications, so the fit, finish and function match the original component it replaces, and each unit is individually tested before it leaves our warehouse.
Is the part tested before it is shipped?
Yes. Every part we sell is inspected before dispatch and tested wherever testing applies — screen assemblies are checked on the panel, the touch response and the connector. Orders are processed and shipped within 1-3 business days after payment is confirmed.
How long does shipping take?
Orders leave our warehouse within 1-3 business days. Express Shipping (DHL, UPS or FedEx) takes 5-8 working days and is normally used for parcels over 2 kg. Registered Air Post takes 10-20 working days and is normally used for parcels under 2 kg. Every order ships with a tracking number. Customs clearance can add extra time, especially during peak season.
Will I be charged import duties or customs fees?
Customs charges depend on your own country's import rules and its de minimis threshold, not on the seller. Some destinations apply no duty at all on lower-value parcels, and where duty or VAT does apply it is collected by your local post office or courier before delivery. We ship every order with complete and accurate commercial documents, which is what keeps a parcel moving through customs instead of sitting in it. If you would like to estimate the charges before you order, email us your country and we will point you to the right authority.
What is your return policy?
We offer a 30-day return policy, which means you can request a return within 30 days of receiving your item. To be eligible, the item must be unused, uninstalled and in the packaging it arrived in. Once a part has been fitted, bonded or used it cannot be returned, so please test the part before installation. To start a return, email sales@iProGadget.com.
What should I do if the part arrives damaged or faulty?
Inspect your order as soon as it arrives. If an item is defective, damaged or not what you ordered, contact us at sales@iProGadget.com straight away with photos or a short unboxing video, and we will arrange a replacement or a refund.
Do you provide repair guides or installation tutorials?
No. We are a supplier of replacement parts only. We are not a repair shop, and we do not provide repair guides, tutorials or step-by-step installation support. Every part we sell is intended to be installed by a professional technician at a qualified repair shop, which also gives the best result: a technician can transfer the small components, handle the adhesives and test the finished repair. Please do not attempt the installation yourself if you have no previous repair experience, as these assemblies are fragile and incorrect handling can damage them permanently. We sell parts only and do not accept responsibility for installation carried out by the customer. Our warranty covers the part itself and remains valid until the part is installed. If a problem appears after the repair, please take the device back to the repair shop that fitted the part so they can inspect the installation and test the device.
Still have a question about this part? Email us at sales@iProGadget.com and we will confirm compatibility, shipping time or return details for you.
