Replacement LCD Screen Display For N133BGA-EAB CMN13A0 13.3 inch HD 30 Pin Panel
iProGadgets OEM Repair Parts for N133BGA-EAB CMN13A0 13.3 inch HD 30 Pin Laptop Screen Replacement — Quick Answers
Quick answer: this is a brand-new 13.3 inch non-touch replacement LCD panel — the N133BGA-EAB slim 1366 x 768 HD panel at 60 Hz on a 30-pin eDP connector, 220 cd/m², matte anti-glare with 3H hard coating, double tested before shipping and covered by a 30-day return window on unused, uninstalled parts. It measures 306.3 x 194.85 mm and carries eight face mounting holes along the top and bottom edges, so it is the bracketed slim panel rather than the flat bracketless type. This code is also catalogued as CMN13A0, and it is the panel we supply against the B133XTN01.6, N133BGE-EAB, M133NWN1 R3 and HB133WX1-402 cross-codes. Send us the full code from the label on the screen you are removing and we will confirm which panel we are shipping before dispatch.
- Fit: The 13.3 inch HD non-touch slim panel coded N133BGA-EAB — the bracketed 306.3 x 194.85 mm panel, no touch layer, no digitizer
- Panel: a-Si TFT-LCD TN, matte anti-glare with 3H hard coating, slim 306.3 x 194.85 mm panel with eight face mounting holes top and bottom, 220 cd/m²
- Testing: every unit is double tested before shipping — display, touch and fitment
Technical Specifications
| Item | Detail |
|---|---|
| Panel model code | N133BGA-EAB — the code printed on the label of the panel; the same panel is also catalogued as CMN13A0, and a Rev.C1 revision of the code is quoted by suppliers |
| Screen size | 13.3 inches diagonal (33.8 cm), 16:9 |
| Resolution | 1366 x 768 px (WXGA HD), 118 PPI |
| Refresh rate | 60 Hz |
| Panel technology | a-Si TFT-LCD, TN, normally white, transmissive — matte anti-glare surface with hard coating 3H, WLED edge-lit backlight with the LED driver on the panel board, 262K colours (6-bit) at 47% NTSC |
| Brightness | 220 cd/m² typical |
| Contrast ratio | 500:1 typical |
| Viewing angle | 45/45/20/45 (left/right/up/down) at CR 10 or better, 6 o'clock optimum — this is a TN panel, so the vertical angles are narrower than an IPS screen and the picture washes out when viewed from below |
| Touch | Non-touch, display-only panel. Touch builds of these laptops take a separate bonded assembly instead of this bare panel |
| Signal interface | eDP 1 lane, 30-pin FPC (I-PEX 20455-030E class), 3.3 V |
| Connector position | Bottom right, viewed from the back of the panel |
| Outline dimensions | 306.3 x 194.85 x 2.85 to 3.0 mm, active area 293.83 x 165.2 mm, weight 240 to 250 g |
| Mounting | Face mounting holes along the top and bottom edges — eight holes in all, which is what the bezel screws to. Check the panel you are removing, rather than assuming from the code alone, because the same 13.3 inch HD size is also built on a flat bracketless frame |
| Cross-reference panel codes | B133XTN01.6, N133BGE-EAB, M133NWN1 R3, HB133WX1-402 and LP133WH2 are supplied as equivalents for the same 30-pin slim frame |
| Cross-reference service codes | J4MTV, 0J4MTV, 0DTMD6, 2C7YD, 02C7YD, L01076-001, L01077-001 and SD10K32416 are quoted by suppliers against this same panel, so any of them can be replaced by the part in this listing |
| NOT the bracketless panel | The N133BGA-EA2 and NT133WHM-N35 codes are a different panel: 300.26 x 187.27 mm and completely flat, with no mounting tabs and no screw holes, held by the bezel and tape. We list that one separately and it does not mount where this panel mounts |
| NOT the higher-resolution panel | The 1920 x 1080 build of these laptops takes a different panel on a different cable; this listing is the 1366 x 768 HD panel only |
| Condition | Brand-new, unassembled |
| Quality | iProGadgets OEM Quality |
Compatibility
| Device | Model numbers / part codes |
|---|---|
| Panel codes covered | N133BGA-EAB (also catalogued as CMN13A0), plus the equivalents B133XTN01.6, N133BGE-EAB, M133NWN1 R3, HB133WX1-402 and LP133WH2 |
| Same panel listed per machine | The identical 306.3 x 194.85 mm panel is the HD screen for the Latitude 3300 and Latitude 3310, and for the ProBook 430 G5, and we list each of those machine entries on its own — so a search for either machine finds both listings, and a search for the panel code finds this one |
| NOT the bracketless panel | N133BGA-EA2 and NT133WHM-N35 are a 300.26 x 187.27 mm bracketless panel — a flat frame with no mounting tabs that does not mount where this panel mounts. We list it separately |
| NOT touch, NOT FHD | Touch builds and the 1920 x 1080 build of these laptops each take a different assembly on a different connector; this listing is the 1366 x 768 HD non-touch panel only |
Before We Ship — Please Send Us These 3 Details
Laptop, all-in-one and desktop PC screens can differ between revisions of the same model, so the listing alone cannot always tell us which panel is inside your machine. After you place the order we will contact you for the three items below — please send them so we can confirm the fitment and ship the correct, fully compatible screen straight away:
- A photo of your computer. A clear photo of the laptop itself, plus the model / service label on the bottom cover (or the model name shown in Settings → About).
- Touch or non-touch, resolution and refresh rate. Tell us whether your screen is a touch screen or a non-touch screen, its resolution, and its refresh rate in Hz. If you are not sure, just send the model number and we will check it for you.
- Photos of your old screen. Once the machine is opened, a full photo of the back of the old screen and a close-up of the label or barcode sticker on it. That label carries the exact panel part number, which removes any doubt about which screen you need.
We check your photos against our stock before dispatch. If something does not match, we will contact you first instead of sending a part that may not fit. Once your details are confirmed, we arrange shipment within 1 to 3 business days. Thank you for helping us get it right.
Installation Notes
- Clean the flex cable with alcohol before installation and confirm that it is well connected.
- Do not pull, tear or push on the flex cable, be careful during installation.
- Before installing the screen, please remove the battery in advance.
- Please tap the screen carefully, because the screen is too fragile to damage.
Quality Control
Strictly tested by the iProGadgets QC Team — every unit is double tested before shipping and ships in good working order. After receiving the part, please check the appearance and test it first: connect the part to the motherboard for a functional test before full installation, and only install once everything works. We are not responsible for any installation mistakes — if you are not experienced with screen replacement, have the part fitted by a professional repair shop.
Shipping
We ship worldwide. Orders are dispatched within 1 to 3 business days, and every package carries a tracking number you can follow on the order page. Delivery typically takes 7 to 10 days after dispatch.
Returns & Warranty
30-day returns on unused, uninstalled parts. The warranty is valid until installed — once a screen has been fitted, the return window no longer applies, which is why we ask you to test before installation.
FAQs
How do I check whether N133BGA-EAB is the panel I need?
Take the screen you are removing out, lay it face down and read the barcode label on the back. This panel answers for the code N133BGA-EAB (also catalogued as CMN13A0) and it measures about 306.3 x 194.85 mm with screw holes along the top and bottom edges — eight holes in all. If your label carries a different code, or if your panel is completely flat with no tabs at all, send us a photo of the label and we will tell you honestly which part you need instead.
Is this the touch screen or the non-touch screen?
This is the non-touch display-only panel — the screen on its own, with no touch layer or digitizer bonded to it. Touch and non-touch screens for the same laptop are different assemblies and do not interchange, so check before ordering: if the screen you are removing responds to finger or stylus input, send us your machine model and the code from the label and we will confirm the right part for you.
Questions about fit, shipping to your country, or bulk pricing? Email sales@iProGadget.com and we will confirm the exact part you need.
Frequently Asked Questions
Is this part compatible with my device?
This listing is for Replacement LCD Screen Display For N133BGA-EAB CMN13A0 13.3 inch HD 30 Pin Panel. It is built as a direct-fit replacement for the model named in the title. Match the model number in the title against your own device before ordering. If you are not sure which version you need, email sales@iProGadget.com and we will confirm the correct part for you.
What is the quality of these replacement parts?
We supply iProGadgets OEM Quality / Premium Compatible replacement parts. Every part is manufactured to OEM specifications, so the fit, finish and function match the original component it replaces, and each unit is individually tested before it leaves our warehouse.
Is the part tested before it is shipped?
Yes. Every part we sell is inspected before dispatch and tested wherever testing applies — screen assemblies are checked on the panel, the touch response and the connector. Orders are processed and shipped within 1-3 business days after payment is confirmed.
How long does shipping take?
Orders leave our warehouse within 1-3 business days. Express Shipping (DHL, UPS or FedEx) takes 5-8 working days and is normally used for parcels over 2 kg. Registered Air Post takes 10-20 working days and is normally used for parcels under 2 kg. Every order ships with a tracking number. Customs clearance can add extra time, especially during peak season.
Will I be charged import duties or customs fees?
Customs charges depend on your own country's import rules and its de minimis threshold, not on the seller. Some destinations apply no duty at all on lower-value parcels, and where duty or VAT does apply it is collected by your local post office or courier before delivery. We ship every order with complete and accurate commercial documents, which is what keeps a parcel moving through customs instead of sitting in it. If you would like to estimate the charges before you order, email us your country and we will point you to the right authority.
What is your return policy?
We offer a 30-day return policy, which means you can request a return within 30 days of receiving your item. To be eligible, the item must be unused, uninstalled and in the packaging it arrived in. Once a part has been fitted, bonded or used it cannot be returned, so please test the part before installation. To start a return, email sales@iProGadget.com.
What should I do if the part arrives damaged or faulty?
Inspect your order as soon as it arrives. If an item is defective, damaged or not what you ordered, contact us at sales@iProGadget.com straight away with photos or a short unboxing video, and we will arrange a replacement or a refund.
Do you provide repair guides or installation tutorials?
No. We are a supplier of replacement parts only. We are not a repair shop, and we do not provide repair guides, tutorials or step-by-step installation support. Every part we sell is intended to be installed by a professional technician at a qualified repair shop, which also gives the best result: a technician can transfer the small components, handle the adhesives and test the finished repair. Please do not attempt the installation yourself if you have no previous repair experience, as these assemblies are fragile and incorrect handling can damage them permanently. We sell parts only and do not accept responsibility for installation carried out by the customer. Our warranty covers the part itself and remains valid until the part is installed. If a problem appears after the repair, please take the device back to the repair shop that fitted the part so they can inspect the installation and test the device.
Still have a question about this part? Email us at sales@iProGadget.com and we will confirm compatibility, shipping time or return details for you.
