Replacement LCD Screen Display For L13837-001 15.6 inch FHD 1920x1080 Panel
iProGadgets OEM Repair Parts for L13837-001 15.6 inch FHD 1920x1080 Laptop Screen Replacement — Quick Answers
Quick answer: this is a replacement raw display panel for the HP ProBook 650 G4 (part code L13837-001) — 15.6″, IPS LCD, 1920 x 1080 px (FHD), 60 Hz, 250 cd/m², matte, 30-pin eDP with the connector at the bottom right, top and bottom mounting brackets included in the panel, non-touch, double tested before shipping and backed by a 30-day return window on unused, uninstalled parts. Check the part code before ordering — the resolution matters. The ProBook 650 G4 also shipped with an HD panel, and that one is a different part code (L13838-001) with a different panel type — a Full HD panel will not replace an HD screen. This is also not the touch version.
- Fit: Compatible with the HP ProBook 650 G4 and other 15.6″ FHD laptops that use the 30-pin eDP L13837-001 raw panel. The cross-referenced part numbers are listed in the specification table. This is the 60 Hz non-touch matte panel — 120 Hz and faster panels use 40-pin connectors, and a ProBook 650 G4 with a touchscreen needs the touch assembly instead. Send us the machine model or a photo of the label and we will confirm before dispatch
- Panel: IPS LCD (ultra wide viewing angle), non-touch, matte finish, 30-pin eDP
- Testing: every unit is double tested before shipping — display, backlight and fitment
Technical Specifications
| Item | Detail |
|---|---|
| Part number | For the HP L13837-001 raw display panel |
| Product name | this is listed as RAW PANEL LCD 15 FHD AG LED UWVA — a bare panel, not an assembly |
| Screen size | 15.6 inches diagonal |
| Resolution | 1920 x 1080 px (FHD) |
| Refresh rate | 60Hz |
| Pixel density | 141 ppi |
| Aspect ratio | 16:9 |
| Panel technology | a-Si TFT-LCD, LCM, IPS type with ultra wide viewing angle, transmissive |
| Brightness | 250 cd/m² |
| Contrast ratio | Not stated by the sources we could verify — we do not quote a figure we cannot confirm |
| Surface | Matte (anti-glare) — from HP, this panel is listed as AG |
| Backlight | LED (White LED), driver included in the panel |
| Signal interface | eDP, 30-pin, connector width 20 mm, 0.5 mm pitch class, connector at the bottom right of the screen |
| Connector position | Bottom right, viewed from the back of the screen |
| Mounting | Top and bottom mounting brackets, supplied with the panel |
| Touch | Display-only panel (no touch layer) |
| NOT the HD panel | The HD 1366 x 768 panel for the same machine is a different part code, L13838-001, and uses a TN panel. It is not interchangeable with this one |
| NOT the touch assembly | A ProBook 650 G4 with a touchscreen needs the touch assembly, which this bare non-touch panel will not fit |
| NOT a high-refresh panel | 120 Hz and faster 15.6″ panels use 40-pin connectors and different part codes — they are not covered by this listing |
| What is not included | No bezel, no hinges, no screws, no eDP cable, no digitizer, no display assembly — this is the bare raw panel |
| Condition | Brand-new, unassembled |
| Quality | iProGadgets OEM Quality |
Compatibility
| Device | Model numbers |
|---|---|
| For HP ProBook | ProBook 650 G4 |
| Panel codes | L13837-001, L13837 001 |
| Cross-referenced part numbers | For HP 798933-006 / 798919-JD1 / 798919-JD2 / 833131-001 / 833132-001 / 755697-JD1 / 739998-001 |
| Where to confirm fitment | Send the machine model, or a photo of the label on the back of the screen you are removing — we will check it against our stock before dispatch |
Before We Ship — Please Send Us These 3 Details
Laptop, all-in-one and desktop PC screens can differ between revisions of the same model, so the listing alone cannot always tell us which panel is inside your machine. After you place the order we will contact you for the three items below — please send them so we can confirm the fitment and ship the correct, fully compatible screen straight away:
- A photo of your computer. A clear photo of the laptop itself, plus the model / service label on the bottom cover (or the model name shown in Settings → About).
- Touch or non-touch, resolution and refresh rate. Tell us whether your screen is a touch screen or a non-touch screen, its resolution, and its refresh rate in Hz. If you are not sure, just send the model number and we will check it for you.
- Photos of your old screen. Once the machine is opened, a full photo of the back of the old screen and a close-up of the label or barcode sticker on it. That label carries the exact panel part number, which removes any doubt about which screen you need.
We check your photos against our stock before dispatch. If something does not match, we will contact you first instead of sending a part that may not fit. Once your details are confirmed, we arrange shipment within 1 to 3 business days. Thank you for helping us get it right.
Installation Notes
- Clean the flex cable with alcohol before installation and confirm that it is well connected.
- Do not pull, tear or push on the flex cable, be careful during installation.
- Before installing the screen, please remove the battery in advance.
- Please tap the screen carefully, because the screen is too fragile to damage.
Quality Control
Strictly tested by the iProGadgets QC Team — every unit is double tested before shipping: the display is checked for dead pixels and uniformity, the backlight is checked for brightness and flicker, and the connector and flex are checked for fit. Only panels that pass both tests are packed. Quality wording: iProGadgets OEM Quality.
Shipping and Delivery
We ship within 1 to 3 business days after the order is confirmed. Each screen is wrapped in protective foam and packed in a strong corrugated carton to survive transit. We ship worldwide with tracked shipping so you can follow the parcel from dispatch to delivery.
Returns & Warranty
Every panel is covered by a 30-day return window on unused, uninstalled parts. Our warranty is valid until installed — once the screen is fitted we cannot take it back, so please confirm the fitment with us before installation. If the panel arrives damaged or does not match what you ordered, contact us within 30 days and we will make it right.
Questions before you order? Send us the machine model or a photo of the label on the back of the screen you are replacing, and we will confirm the fitment before you buy. Email sales@iProGadget.com — we reply within one business day.
Before We Ship — Please Send Us These 3 Details
Laptop, all-in-one and desktop PC screens can differ between revisions of the same model, so the listing alone cannot always tell us which panel is inside your machine. After you place the order we will contact you for the three items below — please send them so we can confirm the fitment and ship the correct, fully compatible screen straight away:
- A photo of your computer. A clear photo of the laptop itself, plus the model / service label on the bottom cover (or the model name shown in Settings → About).
- Touch or non-touch, resolution and refresh rate. Tell us whether your screen is a touch screen or a non-touch screen, its resolution, and its refresh rate in Hz. If you are not sure, just send the model number and we will check it for you.
- Photos of your old screen. Once the machine is opened, a full photo of the back of the old screen and a close-up of the label or barcode sticker on it. That label carries the exact panel part number, which removes any doubt about which screen you need.
We check your photos against our stock before dispatch. If something does not match, we will contact you first instead of sending a part that may not fit. Once your details are confirmed, we arrange shipment within 1 to 3 business days. Thank you for helping us get it right.
Installation Notes
- Clean the flex cable with alcohol before installation and confirm that it is well connected.
- Do not pull, tear or push on the flex cable, be careful during installation.
- Before installing the screen, please remove the battery in advance.
- Please tap the screen carefully, because the screen is too fragile to damage.
Quality Control
Strictly tested by the iProGadgets QC Team — every unit is double tested before shipping and ships in good working order. After receiving the part, please check the appearance and test it first: connect the new part to the motherboard for a functional test before full installation, and only install once everything works. We are not responsible for any installation mistakes — if you are not experienced with screen replacement, have the part fitted by a professional repair shop.
Shipping
We ship worldwide. Orders are dispatched within 1 to 3 business days, and every package carries a tracking number you can follow on the order page. Delivery typically takes 7 to 10 days after dispatch.
Returns & Warranty
30-day returns on unused, uninstalled parts. The warranty is valid until installed — once a screen has been fitted, the return window no longer applies, which is why we ask you to test before installation.
FAQs
Is L13837-001 the same part as L13838-001?
No — and this is the mistake that causes returns on this machine. L13837-001 is the Full HD panel: 1920 x 1080, IPS. L13838-001 is the HD panel: 1366 x 768, TN. Both fit the same HP ProBook 650 G4 chassis and both are 15.6-inch 30-pin matte panels, so the size and the connector are identical and only the label tells them apart. Ordering the Full HD panel for an HD machine, or the other way round, will not work. Read the part code on the back of the screen you are removing.
My ProBook 650 G4 has a touchscreen. Will this fit?
No. This is the non-touch bare panel. A ProBook 650 G4 with a touchscreen uses a touch assembly with a digitizer, which is a different part and costs more. Tell us the machine model before ordering and we will confirm what your specific unit needs.
Does this include the bezel, the frame or the cable?
No. This is HP's raw panel — the bare screen module with its driver board and its top and bottom mounting brackets already fitted. You get the panel only: no bezel, no hinges, no screws, no eDP cable and no digitizer. The cable is normally left on the machine during a screen replacement, so it rarely needs replacing. If you need a full assembly, tell us the machine model.
Will it fit other laptops besides the ProBook 650 G4?
The panel is dimensionally standard — 15.6 inches, 1920 x 1080, 30-pin eDP, matte, brackets top and bottom — and retailers list it for a number of other machines. Those lists come from substitute-part-number databases rather than from HP documentation, so treat them as a starting point rather than a guarantee. Send us the model or a photo of the label on the screen you are removing and we will confirm the fitment before dispatch.
Questions about fit, shipping to your country, or bulk pricing? Email sales@iProGadget.com and we will confirm the exact part you need.
Frequently Asked Questions
Is this part compatible with my device?
This listing is for Replacement LCD Screen Display For L13837-001 15.6 inch FHD 1920x1080 Panel. It is built as a direct-fit replacement for the model named in the title. Match the model number in the title against your own device before ordering. If you are not sure which version you need, email sales@iProGadget.com and we will confirm the correct part for you.
What is the quality of these replacement parts?
We supply iProGadgets OEM Quality / Premium Compatible replacement parts. Every part is manufactured to OEM specifications, so the fit, finish and function match the original component it replaces, and each unit is individually tested before it leaves our warehouse.
Is the part tested before it is shipped?
Yes. Every part we sell is inspected before dispatch and tested wherever testing applies — screen assemblies are checked on the panel, the touch response and the connector. Orders are processed and shipped within 1-3 business days after payment is confirmed.
How long does shipping take?
Orders leave our warehouse within 1-3 business days. Express Shipping (DHL, UPS or FedEx) takes 5-8 working days and is normally used for parcels over 2 kg. Registered Air Post takes 10-20 working days and is normally used for parcels under 2 kg. Every order ships with a tracking number. Customs clearance can add extra time, especially during peak season.
Will I be charged import duties or customs fees?
Customs charges depend on your own country's import rules and its de minimis threshold, not on the seller. Some destinations apply no duty at all on lower-value parcels, and where duty or VAT does apply it is collected by your local post office or courier before delivery. We ship every order with complete and accurate commercial documents, which is what keeps a parcel moving through customs instead of sitting in it. If you would like to estimate the charges before you order, email us your country and we will point you to the right authority.
What is your return policy?
We offer a 30-day return policy, which means you can request a return within 30 days of receiving your item. To be eligible, the item must be unused, uninstalled and in the packaging it arrived in. Once a part has been fitted, bonded or used it cannot be returned, so please test the part before installation. To start a return, email sales@iProGadget.com.
What should I do if the part arrives damaged or faulty?
Inspect your order as soon as it arrives. If an item is defective, damaged or not what you ordered, contact us at sales@iProGadget.com straight away with photos or a short unboxing video, and we will arrange a replacement or a refund.
Do you provide repair guides or installation tutorials?
No. We are a supplier of replacement parts only. We are not a repair shop, and we do not provide repair guides, tutorials or step-by-step installation support. Every part we sell is intended to be installed by a professional technician at a qualified repair shop, which also gives the best result: a technician can transfer the small components, handle the adhesives and test the finished repair. Please do not attempt the installation yourself if you have no previous repair experience, as these assemblies are fragile and incorrect handling can damage them permanently. We sell parts only and do not accept responsibility for installation carried out by the customer. Our warranty covers the part itself and remains valid until the part is installed. If a problem appears after the repair, please take the device back to the repair shop that fitted the part so they can inspect the installation and test the device.
Still have a question about this part? Email us at sales@iProGadget.com and we will confirm compatibility, shipping time or return details for you.
