Replacement LCD Screen Display For HP ProBook 430 G7 L78046-001 13.3 inch HD Panel
iProGadgets OEM Repair Parts for HP ProBook 430 G7 L78046-001 13.3 inch HD Laptop Screen Replacement — Quick Answers
Quick answer: this is a brand-new 13.3 inch non-touch replacement LCD panel for the ProBook 430 G7 — 1366 x 768 HD at 60 Hz on a 30-pin eDP connector, 220 cd/m², matte anti-glare, double tested before shipping and covered by a 30-day return window on unused, uninstalled parts. This is the bracketless ultra-slim panel. It has no mounting brackets and sits on a 300.26 x 187.27 mm frame, held by the bezel and the tape already fitted in the machine, exactly as the panel the laptop shipped with. The earlier ProBook 430 G5 takes a wider 306.3 x 195.2 mm panel that carries brackets top and bottom, so the two do not interchange. Send us the full code from the label on the screen you are removing and we will confirm which panel we are shipping before dispatch.
- Fit: The ProBook 430 G7 Notebook PC — a display-only HD panel, no touch layer and no mounting brackets: the flat ultra-slim type this chassis takes
- Panel: a-Si TFT-LCD TN, matte anti-glare, bracketless ultra-slim 300.26 x 187.27 mm panel, 220 cd/m²
- Testing: every unit is double tested before shipping — display, touch and fitment
Technical Specifications
| Item | Detail |
|---|---|
| Screen size | 13.3 inches diagonal (33.8 cm), 16:9 |
| Resolution | 1366 x 768 px (WXGA HD) |
| Refresh rate | 60 Hz |
| Panel technology | a-Si TFT-LCD, TN, normally white, transmissive — matte anti-glare with hard coating 3H, WLED edge-lit backlight with the LED driver on the panel board |
| Brightness | 220 cd/m² typical.These are real differences between codes rather than measurement error, which is why we ask for the label photo |
| Touch | Non-touch, display-only panel. Touch builds of this laptop take a separate bonded assembly instead of this bare panel |
| Signal interface | eDP 1.2, 1 lane, 30-pin FPC, 3.3 V |
| Connector position | Bottom right, viewed from the back of the panel |
| Outline dimensions | if your label carries that code, send us a photo and we will measure against your frame before dispatch |
| Mounting | Bracketless ultra-slim panel — no mounting tabs and no screw holes. The bezel and the tape already fitted in the machine hold it, exactly as the panel the laptop shipped with |
| Part number covered | L78046-001, the HD non-touch raw panel for the ProBook 430 G7 |
| NOT the ProBook 430 G5 panel | The earlier ProBook 430 G5 takes a wider 306.3 x 195.2 mm panel with mounting brackets top and bottom — a different frame that does not fit this chassis |
| NOT FHD, NOT touch | The higher-resolution build and the touch build of the 430 G7 each take a different assembly; this listing is the HD non-touch panel only |
| Condition | Brand-new, unassembled |
| Quality | iProGadgets OEM Quality |
Compatibility
| Device | Model numbers / part codes |
|---|---|
| ProBook 430 G7 | All models — the 13.3 inch HD non-touch bracketless ultra-slim panel; spare part L78046-001 |
| Same panel also supplied for | ProBook 430 G6 and ProBook 430 G8, and ThinkPad X390, X395 and X13 Gen 1 — the same bracketless 13.3 inch HD panel. That coverage comes from supplier cross-lists rather than the manufacturer's own parts list, so send us the code from your label and we will check it honestly before dispatch |
| NOT NT133WHM-N47 | The backlight driver board on that code is a different size from the one this chassis takes, so it is not a drop-in substitute |
| NOT the ProBook 430 G5 | The 430 G5 takes a wider 306.3 x 195.2 mm panel with mounting brackets top and bottom — a different frame |
| NOT touch, NOT FHD | Touch builds and the higher-resolution build of the 430 G7 each take a different assembly; this listing is the HD non-touch panel only |
Before We Ship — Please Send Us These 3 Details
Laptop, all-in-one and desktop PC screens can differ between revisions of the same model, so the listing alone cannot always tell us which panel is inside your machine. After you place the order we will contact you for the three items below — please send them so we can confirm the fitment and ship the correct, fully compatible screen straight away:
- A photo of your computer. A clear photo of the laptop itself, plus the model / service label on the bottom cover (or the model name shown in Settings → About).
- Touch or non-touch, resolution and refresh rate. Tell us whether your screen is a touch screen or a non-touch screen, its resolution, and its refresh rate in Hz. If you are not sure, just send the model number and we will check it for you.
- Photos of your old screen. Once the machine is opened, a full photo of the back of the old screen and a close-up of the label or barcode sticker on it. That label carries the exact panel part number, which removes any doubt about which screen you need.
We check your photos against our stock before dispatch. If something does not match, we will contact you first instead of sending a part that may not fit. Once your details are confirmed, we arrange shipment within 1 to 3 business days. Thank you for helping us get it right.
Installation Notes
- Clean the flex cable with alcohol before installation and confirm that it is well connected.
- Do not pull, tear or push on the flex cable, be careful during installation.
- Before installing the screen, please remove the battery in advance.
- Please tap the screen carefully, because the screen is too fragile to damage.
Quality Control
Strictly tested by the iProGadgets QC Team — every unit is double tested before shipping and ships in good working order. After receiving the part, please check the appearance and test it first: connect the part to the motherboard for a functional test before full installation, and only install once everything works. We are not responsible for any installation mistakes — if you are not experienced with screen replacement, have the part fitted by a professional repair shop.
Shipping
We ship worldwide. Orders are dispatched within 1 to 3 business days, and every package carries a tracking number you can follow on the order page. Delivery typically takes 7 to 10 days after dispatch.
Returns & Warranty
30-day returns on unused, uninstalled parts. The warranty is valid until installed — once a screen has been fitted, the return window no longer applies, which is why we ask you to test before installation.
FAQs
How do I tell the bracketless panel from the bracketed one?
Turn the screen you are removing face down. This one is completely flat: it measures about 300.26 x 187.27 mm and has no tabs, no screw holes and no metal brackets at all. The panel used in the earlier ProBook 430 G5 is wider, about 306.3 x 195.2 mm, and does carry steel mounting brackets with screw holes along the top and bottom edges. If your panel has brackets, it is not this one — tell us and we will point you at the right listing. The code printed on the label is the reliable check, so a photo of that label is the fastest way for us to get it right.
Is this the touch version or the non-touch version?
This is the non-touch display-only panel — the screen on its own, with no touch layer or digitizer bonded to it. Touch and non-touch screens for the same machine are different assemblies and do not interchange, so please check before ordering: if the screen you are removing responds to finger or stylus input, send us your machine model and the code from the label and we will confirm the right part for you.
Questions about fit, shipping to your country, or bulk pricing? Email sales@iProGadget.com and we will confirm the exact part you need.
Frequently Asked Questions
Is this part compatible with my device?
This listing is for Replacement LCD Screen Display For HP ProBook 430 G7 L78046-001 13.3 inch HD Panel. It is built as a direct-fit replacement for the model named in the title. Match the model number in the title against your own device before ordering. If you are not sure which version you need, email sales@iProGadget.com and we will confirm the correct part for you.
What is the quality of these replacement parts?
We supply iProGadgets OEM Quality / Premium Compatible replacement parts. Every part is manufactured to OEM specifications, so the fit, finish and function match the original component it replaces, and each unit is individually tested before it leaves our warehouse.
Is the part tested before it is shipped?
Yes. Every part we sell is inspected before dispatch and tested wherever testing applies — screen assemblies are checked on the panel, the touch response and the connector. Orders are processed and shipped within 1-3 business days after payment is confirmed.
How long does shipping take?
Orders leave our warehouse within 1-3 business days. Express Shipping (DHL, UPS or FedEx) takes 5-8 working days and is normally used for parcels over 2 kg. Registered Air Post takes 10-20 working days and is normally used for parcels under 2 kg. Every order ships with a tracking number. Customs clearance can add extra time, especially during peak season.
Will I be charged import duties or customs fees?
Customs charges depend on your own country's import rules and its de minimis threshold, not on the seller. Some destinations apply no duty at all on lower-value parcels, and where duty or VAT does apply it is collected by your local post office or courier before delivery. We ship every order with complete and accurate commercial documents, which is what keeps a parcel moving through customs instead of sitting in it. If you would like to estimate the charges before you order, email us your country and we will point you to the right authority.
What is your return policy?
We offer a 30-day return policy, which means you can request a return within 30 days of receiving your item. To be eligible, the item must be unused, uninstalled and in the packaging it arrived in. Once a part has been fitted, bonded or used it cannot be returned, so please test the part before installation. To start a return, email sales@iProGadget.com.
What should I do if the part arrives damaged or faulty?
Inspect your order as soon as it arrives. If an item is defective, damaged or not what you ordered, contact us at sales@iProGadget.com straight away with photos or a short unboxing video, and we will arrange a replacement or a refund.
Do you provide repair guides or installation tutorials?
No. We are a supplier of replacement parts only. We are not a repair shop, and we do not provide repair guides, tutorials or step-by-step installation support. Every part we sell is intended to be installed by a professional technician at a qualified repair shop, which also gives the best result: a technician can transfer the small components, handle the adhesives and test the finished repair. Please do not attempt the installation yourself if you have no previous repair experience, as these assemblies are fragile and incorrect handling can damage them permanently. We sell parts only and do not accept responsibility for installation carried out by the customer. Our warranty covers the part itself and remains valid until the part is installed. If a problem appears after the repair, please take the device back to the repair shop that fitted the part so they can inspect the installation and test the device.
Still have a question about this part? Email us at sales@iProGadget.com and we will confirm compatibility, shipping time or return details for you.
