Replacement LCD Screen Display For HP ProBook 430 G5 L01076-001 13.3 inch HD Panel
iProGadgets OEM Repair Parts for HP ProBook 430 G5 L01076-001 13.3 inch HD Laptop Screen Replacement — Quick Answers
Quick answer: this is a brand-new 13.3 inch non-touch replacement LCD panel for the ProBook 430 G5 — 1366 x 768 HD at 60 Hz on a 30-pin eDP connector, 220 cd/m², matte anti-glare, double tested before shipping and covered by a 30-day return window on unused, uninstalled parts. Please match the mounting before you order. The 430 G5 takes the slim HD panel that carries mounting brackets top and bottom on a 306.3 x 195.2 mm frame, and that is the panel in this listing. The later ProBook 430 G6, G7 and G8 take a different bracketless ultra-slim panel on a narrower frame, and the higher-resolution version of this laptop takes a different panel again. Send us the full code from the label on the screen you are removing and we will confirm which panel we are shipping before dispatch.
- Fit: The ProBook 430 G5 Notebook PC — a display-only HD panel with the top and bottom mounting brackets this chassis screws to, no touch layer
- Panel: a-Si TFT-LCD TN, matte anti-glare, slim 306.3 x 195.2 mm panel with mounting brackets top and bottom, 220 cd/m²
- Testing: every unit is double tested before shipping — display, touch and fitment
Technical Specifications
| Item | Detail |
|---|---|
| Screen size | 13.3 inches diagonal (33.8 cm), 16:9 |
| Resolution | 1366 x 768 px (WXGA HD) |
| Refresh rate | 60 Hz |
| Panel technology | a-Si TFT-LCD, TN, normally white, transmissive — matte anti-glare surface with hard coating 3H, WLED edge-lit backlight with the LED driver on the panel board |
| Brightness | 220 cd/m² typical |
| Touch | Non-touch, display-only panel. Touch builds of this laptop take a separate bonded assembly instead of this bare panel |
| Signal interface | eDP 1.2, 1 lane, 30-pin FPC, 3.3 V |
| Connector position | Bottom right, viewed from the back of the panel, on a 20 mm connector body |
| Outline dimensions | 306.3 x 195.2 x 3.0 mm — the slim HD frame the 430 G5 bezel is built around |
| Mounting | Slim panel with face mounting holes top and bottom: eight holes in all, which is what the 430 G5 bezel screws to. Note that this code also exists in a side-hole revision measuring 314.1 x 188.7 mm, so check the panel you are removing rather than assuming from the code alone |
| Part numbers covered | L01076-001 covers the HD panel for models without WWAN and L01077-001 the HD panel for WWAN models; both are the same 13.3 inch HD SVA panel and either takes this part |
| NOT the bracketless panel | The ProBook 430 G6, G7 and G8 take a narrower 300.26 mm bracketless ultra-slim panel, It has no mounting brackets and is 8 mm shorter, so it does not mount in the 430 G5 |
| NOT the FHD panel | The higher-resolution version of this laptop takes a different panel on a different cable; this listing is the 1366 x 768 HD panel only |
| Condition | Brand-new, unassembled |
| Quality | iProGadgets OEM Quality |
Compatibility
| Device | Model numbers / part codes |
|---|---|
| For ProBook 430 G5 | All models and SKUs — the 13.3 inch HD non-touch screen; spare part L01076-001 for models without WWAN and L01077-001 for WWAN models |
| Same panel listed separately | The identical 306.3 x 195.2 mm panel is also the HD screen for the Latitude 3300 and Latitude 3310, and we list that machine pair on its own, so a search for either machine finds both listings |
| NOT the ProBook 430 G6 / G7 / G8 | Those chassis take a 300.26 mm bracketless ultra-slim panel with no mounting brackets — a different frame that does not fit the 430 G5 |
| NOT touch, NOT FHD | Touch builds and the higher-resolution build of the 430 G5 each take a different assembly; this listing is the HD non-touch panel only |
Before We Ship — Please Send Us These 3 Details
Laptop, all-in-one and desktop PC screens can differ between revisions of the same model, so the listing alone cannot always tell us which panel is inside your machine. After you place the order we will contact you for the three items below — please send them so we can confirm the fitment and ship the correct, fully compatible screen straight away:
- A photo of your computer. A clear photo of the laptop itself, plus the model / service label on the bottom cover (or the model name shown in Settings → About).
- Touch or non-touch, resolution and refresh rate. Tell us whether your screen is a touch screen or a non-touch screen, its resolution, and its refresh rate in Hz. If you are not sure, just send the model number and we will check it for you.
- Photos of your old screen. Once the machine is opened, a full photo of the back of the old screen and a close-up of the label or barcode sticker on it. That label carries the exact panel part number, which removes any doubt about which screen you need.
We check your photos against our stock before dispatch. If something does not match, we will contact you first instead of sending a part that may not fit. Once your details are confirmed, we arrange shipment within 1 to 3 business days. Thank you for helping us get it right.
Installation Notes
- Clean the flex cable with alcohol before installation and confirm that it is well connected.
- Do not pull, tear or push on the flex cable, be careful during installation.
- Before installing the screen, please remove the battery in advance.
- Please tap the screen carefully, because the screen is too fragile to damage.
Quality Control
Strictly tested by the iProGadgets QC Team — every unit is double tested before shipping and ships in good working order. After receiving the part, please check the appearance and test it first: connect the part to the motherboard for a functional test before full installation, and only install once everything works. We are not responsible for any installation mistakes — if you are not experienced with screen replacement, have the part fitted by a professional repair shop.
Shipping
We ship worldwide. Orders are dispatched within 1 to 3 business days, and every package carries a tracking number you can follow on the order page. Delivery typically takes 7 to 10 days after dispatch.
Returns & Warranty
30-day returns on unused, uninstalled parts. The warranty is valid until installed — once a screen has been fitted, the return window no longer applies, which is why we ask you to test before installation.
FAQs
How do I know whether my 430 G5 needs this panel or the bracketless one?
Turn the screen you are removing face down and look at how it is held. This panel measures 306.3 x 195.2 mm and has steel mounting brackets with screw holes along the top and bottom edges — the bezel screws straight through them. The panel used in the later ProBook 430 G6, G7 and G8 is narrower, about 300.26 mm across, and completely flat with no tabs or screw holes, because it is held by the bezel and tape. If yours is the flat one, tell us and we will point you at the right listing; do not order this panel for it.
Is this the same panel as the ProBook 430 G6 and 430 G7 use?
No. The 430 G5 uses a wider panel with mounting brackets top and bottom, and the 430 G6 and 430 G7 use a narrower bracketless ultra-slim panel. They share the same size, resolution and connector, so they look alike from the front, but the frame and the mounting are different and the two do not interchange. The label on the back of your own panel is the reliable answer, so send us a photo of it and we will match the code for you.
Is this the touch screen or the non-touch screen?
This is the non-touch display-only panel — the screen on its own, with no touch layer or digitizer bonded to it. Touch and non-touch screens for the same laptop are different assemblies and do not interchange, so check before ordering: if the screen you are removing responds to finger or stylus input, send us your machine model and the code from the label and we will confirm the right part for you.
Questions about fit, shipping to your country, or bulk pricing? Email sales@iProGadget.com and we will confirm the exact part you need.
Frequently Asked Questions
Is this part compatible with my device?
This listing is for Replacement LCD Screen Display For HP ProBook 430 G5 L01076-001 13.3 inch HD Panel. It is built as a direct-fit replacement for the model named in the title. Match the model number in the title against your own device before ordering. If you are not sure which version you need, email sales@iProGadget.com and we will confirm the correct part for you.
What is the quality of these replacement parts?
We supply iProGadgets OEM Quality / Premium Compatible replacement parts. Every part is manufactured to OEM specifications, so the fit, finish and function match the original component it replaces, and each unit is individually tested before it leaves our warehouse.
Is the part tested before it is shipped?
Yes. Every part we sell is inspected before dispatch and tested wherever testing applies — screen assemblies are checked on the panel, the touch response and the connector. Orders are processed and shipped within 1-3 business days after payment is confirmed.
How long does shipping take?
Orders leave our warehouse within 1-3 business days. Express Shipping (DHL, UPS or FedEx) takes 5-8 working days and is normally used for parcels over 2 kg. Registered Air Post takes 10-20 working days and is normally used for parcels under 2 kg. Every order ships with a tracking number. Customs clearance can add extra time, especially during peak season.
Will I be charged import duties or customs fees?
Customs charges depend on your own country's import rules and its de minimis threshold, not on the seller. Some destinations apply no duty at all on lower-value parcels, and where duty or VAT does apply it is collected by your local post office or courier before delivery. We ship every order with complete and accurate commercial documents, which is what keeps a parcel moving through customs instead of sitting in it. If you would like to estimate the charges before you order, email us your country and we will point you to the right authority.
What is your return policy?
We offer a 30-day return policy, which means you can request a return within 30 days of receiving your item. To be eligible, the item must be unused, uninstalled and in the packaging it arrived in. Once a part has been fitted, bonded or used it cannot be returned, so please test the part before installation. To start a return, email sales@iProGadget.com.
What should I do if the part arrives damaged or faulty?
Inspect your order as soon as it arrives. If an item is defective, damaged or not what you ordered, contact us at sales@iProGadget.com straight away with photos or a short unboxing video, and we will arrange a replacement or a refund.
Do you provide repair guides or installation tutorials?
No. We are a supplier of replacement parts only. We are not a repair shop, and we do not provide repair guides, tutorials or step-by-step installation support. Every part we sell is intended to be installed by a professional technician at a qualified repair shop, which also gives the best result: a technician can transfer the small components, handle the adhesives and test the finished repair. Please do not attempt the installation yourself if you have no previous repair experience, as these assemblies are fragile and incorrect handling can damage them permanently. We sell parts only and do not accept responsibility for installation carried out by the customer. Our warranty covers the part itself and remains valid until the part is installed. If a problem appears after the repair, please take the device back to the repair shop that fitted the part so they can inspect the installation and test the device.
Still have a question about this part? Email us at sales@iProGadget.com and we will confirm compatibility, shipping time or return details for you.
