Replacement LCD Screen Display For HP Pavilion 15-CS 15T-CS L25333-001 15.6 inch FHD Touch Panel
iProGadgets OEM Repair Parts for HP Pavilion 15-CS 15T-CS L25333-001 15.6 inch FHD Touch Laptop Screen Replacement — Quick Answers
Quick answer: this is a brand-new 15.6 inch Full HD touch replacement LCD panel — the L25333-001 panel for the Pavilion 15-cs and 15t-cs, 1920 x 1080 at 60 Hz on a 40-pin eDP connector, BrightView glossy with a 3H hard coating and the touch layer built into the panel cell, double tested before shipping and covered by a 30-day return window on unused, uninstalled parts. It measures 350.66 x 216.15 mm and carries no mounting brackets: the display bezel adhesive and the rear cover adhesive hold it in place, and the panel is supplied on its own. Check the touch function before you order. The parts list for this series carries two nearly identical glossy Full HD panels one digit apart — this one, and L25334-001 without touch. If the screen you are removing does not respond to your finger, you need the non-touch part instead, because a non-touch panel cannot be made to work in a touch machine. Send us the code from the label on the back of your old screen and we will confirm which panel we are shipping before dispatch.
- Fit: The 15.6 inch Full HD touch panel coded L25333-001 — the glossy BrightView on-cell touch screen on a 40-pin eDP connector that the Pavilion 15-cs and 15t-cs shipped with
- Panel: a-Si TFT-LCD wide-viewing-angle (UWVA) panel with an on-cell capacitive touch layer, BrightView glossy front with 3H hard coating, no mounting brackets, 250 cd/m², 350.66 x 216.15 mm
- Testing: every unit is double tested before shipping — display, touch and fitment
Technical Specifications
| Item | Detail |
|---|---|
| Spare part number | L25333-001 — the number on the parts list for this series for the Full HD BrightView UWVA touch panel. Some suppliers also quote L47879-JD2 alongside it for the same screen |
| Screen size | 15.6 inches diagonal (39.6 cm), 16:9 |
| Resolution | 1920 x 1080 px (Full HD), 141 PPI |
| Refresh rate | 60 Hz |
| Panel technology | a-Si TFT-LCD, wide-viewing-angle IPS-class panel — the parts list designation for this series is UWVA, which is the equivalent of IPS — normally black, transmissive, WLED edge-lit backlight with the LED driver on the panel board, 262K colours (6-bit) at 45% NTSC |
| Touch | Yes — capacitive multi-touch, built into the panel cell (on-cell / touch-on-panel). There is no separate digitizer glass plate to transfer from your old screen, so the touch layer arrives with the panel and works as soon as the machine is assembled. Test it before final assembly: a weak digitizer board or a damaged display cable is the usual cause of ghost touch, dead zones or inverted touch, so please check that cable and board rather than concluding the panel is faulty |
| Surface finish | BrightView, which is the glossy front (Haze 0%) with a 3H hard coating. One supplier catalogue describes this spare part as matte; the parts list designation is BrightView and every panel datasheet quoted against this part records a gloss front, so order on the understanding that this is the glossy screen. Its narrow-bezel anti-glare full-HD sibling is a different part number, L47710-001 |
| Brightness | 250 cd/m² typical on the two panel codes most often quoted against this spare part; one of the quoted codes is catalogued at 300 cd/m². The parts list also spares different display rear covers for 220/250-nit and for 300-nit builds, so both brightness bins exist in this chassis. A replacement panel may therefore look slightly brighter or dimmer than the screen it replaces — that is a production-batch difference, not a fault |
| Contrast ratio | 800:1 typical (700:1 on the 300 cd/m² code) |
| Viewing angle | 85/85/85/85 (left/right/up/down) at CR 10 or better — a full wide-angle panel, so colour and contrast hold up from the sides, above and below |
| Signal interface | eDP, 40-pin connector, 3.3 V — the plug is about 25 mm across. Count the contacts on the flex of your old screen before ordering |
| Connector position | Bottom right, viewed from the back of the panel |
| Outline dimensions | 350.66 mm wide x 216.15 to 216.69 mm high x 3.2 to 3.4 mm deep, active area 344.16 x 193.59 mm, mass 380 to 400 g |
| Mounting | No brackets — this slim panel is held by adhesive, not screws. The bezel adhesive and the rear cover adhesive are part of what the factory spare covers, and we supply the panel on its own, so have fresh adhesive tape ready before you start |
| Panel codes quoted for this part | They agree on 15.6 inches, 1920 x 1080, a 40-pin eDP connector at the bottom right, a gloss front and no brackets, so we do not treat them as different products — but they are separate catalogue entries and we do not promise a specific one. Read the code off the label of the screen you are removing and send it to us |
| NOT the non-touch panel | L25334-001 is the same 15.6 inch Full HD BrightView UWVA panel without touch, one digit away from this part number, and L25331-001, L25332-001 and L47710-001 are the anti-glare non-touch builds. A non-touch panel cannot be used in a touch machine — the touch layer lives inside the panel, so the screen would light up but nothing would respond |
| NOT the HD touch panel | L25330-001 is the 1366 x 768 HD BrightView touch panel for the same series. It is also a glossy touch screen, so it looks like the right part in a photo, but it is not a Full HD panel and it will not do if your old screen is 1920 x 1080. If you are replacing the HD touch screen, tell us and we will match you to that part number instead |
| NOT a whole display assembly | This is the screen panel on its own — no display bezel, no rear cover, no hinges and no camera module. If you need the complete display assembly or the bezel, tell us before ordering |
| Condition | Brand-new, unassembled |
| Quality | iProGadgets OEM Quality |
Compatibility
| Device | Model numbers / part codes |
|---|---|
| Machine coverage — confirmed | For Pavilion 15-cs and Pavilion 15t-cs — the 15-cs0xxx, 15-cs1xxx, 15-cs2xxx and 15-cs3xxx builds that were ordered with the Full HD touch display. The parts list for the Pavilion 15 gives L25333-001 as the Full HD BrightView UWVA touch panel for this series, so this is the confirmed fitment for the listing |
| Machine coverage — supplier-quoted | The HP 15-dy and 15t-dy, and the Pavilion 15-eg and 15t-eg, are sold by suppliers as the same 40-pin panel, but the parts lists for those chassis carry their own numbers — M44842-001 for the 15-dy and M16342-001 for the 15-eg0000, described as Full HD BrightView UWVA touch-on-panel, 250 nits. Because those two names come from supplier cross-lists rather than from the document for your own machine, send us the code from your label and we will check it honestly before dispatch |
| NOT the non-touch panel | L25334-001 (Full HD BrightView UWVA, no touch), L25331-001, L25332-001 and L47710-001 (anti-glare, no touch) do not fit a touch machine and are not interchangeable with this part |
| NOT the HD panel | L25330-001 (1366 x 768 BrightView touch), L25335-001 and L25336-001 (1366 x 768, no touch) are the HD panels for this series — a different resolution on the same 40-pin connector. A 1366 x 768 machine will not show a correct picture on a 1920 x 1080 panel, and vice versa |
| NOT the 15-fc build | The Pavilion 15-fc and the HP 15-fc take a later display assembly with its own part numbers (P34923-001 among them). It is a different chassis and this panel is not the part for it |
Before We Ship — Please Send Us These 3 Details
Laptop, all-in-one and desktop PC screens can differ between revisions of the same model, so the listing alone cannot always tell us which panel is inside your machine. After you place the order we will contact you for the three items below — please send them so we can confirm the fitment and ship the correct, fully compatible screen straight away:
- A photo of your computer. A clear photo of the laptop itself, plus the model / service label on the bottom cover (or the model name shown in Settings → About).
- Touch or non-touch, resolution and refresh rate. Tell us whether your screen is a touch screen or a non-touch screen, its resolution, and its refresh rate in Hz. If you are not sure, just send the model number and we will check it for you.
- Photos of your old screen. Once the machine is opened, a full photo of the back of the old screen and a close-up of the label or barcode sticker on it. That label carries the exact panel part number, which removes any doubt about which screen you need.
We check your photos against our stock before dispatch. If something does not match, we will contact you first instead of sending a part that may not fit. Once your details are confirmed, we arrange shipment within 1 to 3 business days. Thank you for helping us get it right.
Installation Notes
- Clean the flex cable with alcohol before installation and confirm that it is well connected.
- Do not pull, tear or push on the flex cable, be careful during installation.
- Before installing the screen, please remove the battery in advance.
- Please tap the screen carefully, because the screen is too fragile to damage.
Quality Control
Strictly tested by the iProGadgets QC Team — every unit is double tested before shipping and ships in good working order. After receiving the part, please check the appearance and test it first: connect the part to the motherboard for a functional test before full installation, and only install once everything works. We are not responsible for any installation mistakes — if you are not experienced with screen replacement, have the part fitted by a professional repair shop.
Shipping
We ship worldwide. Orders are dispatched within 1 to 3 business days, and every package carries a tracking number you can follow on the order page. Delivery typically takes 7 to 10 days after dispatch.
Returns & Warranty
30-day returns on unused, uninstalled parts. The warranty is valid until installed — once a screen has been fitted, the return window no longer applies, which is why we ask you to test before installation.
FAQs
How do I check that L25333-001 is the screen I need?
Open the machine, lay the screen face down and read the barcode label on the back of the panel. This listing answers for the code L25333-001 and for the panel codes quoted against it, and it should be 1920 x 1080, 15.6 inches, a glossy front and 40-pin connector at the bottom right, with no screw tabs anywhere on the frame. If the label carries a different number, or the panel you are removing is not Full HD, send us a photo of that label and we will tell you honestly which part you need instead of shipping the wrong screen.
What is the difference between L25333-001 and L25334-001?
They are the same size, the same 1920 x 1080 resolution and the same glossy BrightView UWVA front — the difference is touch. L25333-001 is the touch screen and L25334-001 is the same panel without the touch layer. Because the two numbers sit one digit apart, this is the easiest mistake to make on this machine: if the screen you are removing responds to your finger or a stylus, you need this listing; if it is display-only, you need the non-touch part. Tell us which you have and we will confirm before dispatch.
Is this screen glossy or matte?
It is the glossy screen — the parts list designation is BrightView, and the panel datasheets quoted against this part number all record a gloss front with a 3H hard coating. You may see this spare part advertised as matte by some sellers; that is a catalogue error on their side, copied from the anti-glare sibling. If you specifically need the anti-glare Full HD panel, that is a different part number and we will point you at it.
Will the touch work straight away, and what if it does not?
Yes — the touch layer is built into the panel cell, so it arrives with the screen and no separate digitizer glass has to be transferred. Fit the panel, reconnect the display cable and test touch before you close the machine up. If touch misbehaves — ghost touches, dead strips, inverted response — the usual causes are the display cable not seated properly or a weakened digitizer board on the machine, so check those two first. Still faulty, and contact us: we test every unit before it ships and we will sort it out.
My laptop is a 15-dy or a 15-eg, not a 15-cs — will this fit?
Those two chassis are sold by suppliers as the same 40-pin Full HD touch panel, but the factory parts lists for them carry their own numbers — M44842-001 for the 15-dy and M16342-001 for the 15-eg0000, both described as Full HD BrightView UWVA touch-on-panel. Because that equivalence comes from supplier cross-lists and not from the document for your own machine, we do not promise it: place the order, send us a photo of the label on the back of your old screen, and we will confirm the panel against your machine before we dispatch. If it turns out to be a different part we will tell you rather than ship one that does not fit.
Questions about fit, shipping to your country, or bulk pricing? Email sales@iProGadget.com and we will confirm the exact part you need.
Frequently Asked Questions
Is this part compatible with my device?
This listing is for Replacement LCD Screen Display For HP Pavilion 15-CS 15T-CS L25333-001 15.6 inch FHD Touch Panel. It is built as a direct-fit replacement for the model named in the title. Match the model number in the title against your own device before ordering. If you are not sure which version you need, email sales@iProGadget.com and we will confirm the correct part for you.
What is the quality of these replacement parts?
We supply iProGadgets OEM Quality / Premium Compatible replacement parts. Every part is manufactured to OEM specifications, so the fit, finish and function match the original component it replaces, and each unit is individually tested before it leaves our warehouse.
Is the part tested before it is shipped?
Yes. Every part we sell is inspected before dispatch and tested wherever testing applies — screen assemblies are checked on the panel, the touch response and the connector. Orders are processed and shipped within 1-3 business days after payment is confirmed.
How long does shipping take?
Orders leave our warehouse within 1-3 business days. Express Shipping (DHL, UPS or FedEx) takes 5-8 working days and is normally used for parcels over 2 kg. Registered Air Post takes 10-20 working days and is normally used for parcels under 2 kg. Every order ships with a tracking number. Customs clearance can add extra time, especially during peak season.
Will I be charged import duties or customs fees?
Customs charges depend on your own country's import rules and its de minimis threshold, not on the seller. Some destinations apply no duty at all on lower-value parcels, and where duty or VAT does apply it is collected by your local post office or courier before delivery. We ship every order with complete and accurate commercial documents, which is what keeps a parcel moving through customs instead of sitting in it. If you would like to estimate the charges before you order, email us your country and we will point you to the right authority.
What is your return policy?
We offer a 30-day return policy, which means you can request a return within 30 days of receiving your item. To be eligible, the item must be unused, uninstalled and in the packaging it arrived in. Once a part has been fitted, bonded or used it cannot be returned, so please test the part before installation. To start a return, email sales@iProGadget.com.
What should I do if the part arrives damaged or faulty?
Inspect your order as soon as it arrives. If an item is defective, damaged or not what you ordered, contact us at sales@iProGadget.com straight away with photos or a short unboxing video, and we will arrange a replacement or a refund.
Do you provide repair guides or installation tutorials?
No. We are a supplier of replacement parts only. We are not a repair shop, and we do not provide repair guides, tutorials or step-by-step installation support. Every part we sell is intended to be installed by a professional technician at a qualified repair shop, which also gives the best result: a technician can transfer the small components, handle the adhesives and test the finished repair. Please do not attempt the installation yourself if you have no previous repair experience, as these assemblies are fragile and incorrect handling can damage them permanently. We sell parts only and do not accept responsibility for installation carried out by the customer. Our warranty covers the part itself and remains valid until the part is installed. If a problem appears after the repair, please take the device back to the repair shop that fitted the part so they can inspect the installation and test the device.
Still have a question about this part? Email us at sales@iProGadget.com and we will confirm compatibility, shipping time or return details for you.
