For Acer Nitro V 15 ANV15-41 ANV15-41-R1P5 ANV15-41-R1KX 15.6 inch FHD 165Hz LCD Panel
iProGadgets OEM Repair Parts for the Acer Nitro V 15 ANV15-41 — Screen Reference and Fitment Check
Quick answer: this is a brand-new 15.6 inch FHD 165 Hz non-touch screen for the Acer Nitro V 15 ANV15-41 — the AMD build, including the ANV15-41-R1P5 and ANV15-41-R1KX configurations. It is a bare panel: no touch layer, no digitizer glass, no touch lead, on a 40-pin eDP connector, matte anti-glare. Check the refresh rate before you order — this machine was sold at 144 Hz as well as 165 Hz, and the two are not interchangeable even though they share the same size, resolution and plug. Read it in Windows under Settings, System, Display, Advanced display; if it says 144 Hz, this is not your part. Every unit is double tested before shipping and covered by a 30-day return window on unused, uninstalled parts.
- Fit: The 15.6 inch FHD 165 Hz non-touch screen for the Acer Nitro V 15 ANV15-41, the AMD Ryzen build, in the configurations sold as ANV15-41-R1P5 and ANV15-41-R1KX. 40-pin eDP connector at the bottom right of the panel, slim build with no side brackets, matte anti-glare, no touch layer
- Panel: an AHVA/IPS panel, 1920 x 1080, 165 Hz, matte anti-glare (Acer calls the coating ComfyView), on a 40-pin eDP connector — and non-touch, so there is no touch layer, no digitizer glass to transfer across and no touch lead on the machine for it to connect to
- Testing: every unit is double tested before shipping — display check and fitment check against the machine it is sold for
Technical Specifications
| Item | Detail |
|---|---|
| The machine this screen is sold for | The Acer Nitro V 15 ANV15-41 — the AMD build — in its 165 Hz configuration, including the SKUs sold as ANV15-41-R1P5 and ANV15-41-R1KX. The processor and graphics card do not change the screen: this panel covers the Ryzen 5 7535HS, Ryzen 7 7735HS and Ryzen 5 6600H builds and the RTX 3050, RTX 4050 and RTX 4060 options alike. What does matter is the refresh rate — see the row below before ordering |
| Refresh rate — check this first | 165 Hz, and this is the number that decides whether this is your part. Every Nitro V 15 is a 15.6 inch 1080p IPS panel, but the refresh rate rises by generation: the ANV15-51 shipped at 144 Hz, the ANV15-41 at 144 Hz or 165 Hz, and the ANV15-52 at 165 Hz or 180 Hz. So the model name alone does not identify the screen — check the rate the machine actually runs before you order (in Windows: Settings, System, Display, Advanced display) or read the SKU code on the underside and send it to us |
| Screen size | 15.6 inches diagonal (39.6 cm), 16:9, about 141 PPI |
| Resolution | 1920 x 1080 px (FHD / 1080p) |
| Panel technology | IPS-family AHVA, normally black, transmissive, with WLED edge backlighting and no separate backlight driver. Matte anti-glare surface, viewing angle 85/85/85/85, response about 8 ms (about 3 ms grey to grey with overdrive), 16.7 million colours, 3.3 V. There is no glossy option on this line — these machines were sold anti-glare — so a matte screen is what you are removing and a matte screen is what you get |
| Touch | No — non-touch. There is no touch layer inside this panel, no digitizer glass bonded over it and no touch connector on it. No Nitro V 15 was offered with a touchscreen: the whole line is 1080p non-touch, with no 1440p and no OLED option on any of them. If the screen you are removing answers to your finger, you are not holding a Nitro V 15 panel — send us a photo of the label and we will identify what you have |
| Signal interface | eDP, 4 lanes, eDP 1.3, on a 40-pin connector at 3.3 V. Because this is the non-touch build there is no third lead to release — one plug, not two |
| Connector position and width | Bottom right as you look at the back of the panel — every supplier record for this machine agrees on that. What they do not agree on is the width of the plug shell: one prints 40 pins at 25 mm for this machine and 40 pins at 21 mm for the same panel code. The pin count is settled at 40; the shell width is not, so rather than print a number we cannot stand behind we ask for a photo of the label before dispatch. Connector width and side are fitment facts, not details — they are the commonest cause of a wrong-order return on gaming-laptop screens |
| Panel codes covered | Read the code printed on the back of the screen you are removing and send it to us |
| Outline and mounting | Slim build, outline about 350.66 mm wide x 216 mm high x 2.6 mm deep; active area 344.16 x 193.59 mm. No side brackets and no mounting lugs — the panel is held by the bezel and by adhesive, so have bezel adhesive ready before you start and do not expect screw tabs. The driver strip is bonded along one long edge, so handle the panel by its short edges and never flex the long edge |
| NOT the 144 Hz panel for the same machine | The same chassis, the same 15.6 inch size, the same 1920 x 1080 resolution and the same 40-pin plug were also sold at 144 Hz, and that is a different panel. The ANV15-51 (the Intel build of this machine) is 144 Hz, and the ANV15-41 exists in both rates. A 144 Hz panel and a 165 Hz panel are not interchangeable in either direction — the machine's own display tuning and cable are built for the panel that shipped in it. Check the rate before you order: Settings, System, Display, Advanced display, and read the refresh rate. If it says 144 Hz, this is not your part |
| NOT the Intel ANV15-51 build | The ANV15-51 is the Intel build sold under the same "Nitro V 15" name — 13th-gen Core, Thunderbolt 4 rather than USB4, and a 144 Hz, 250 nit screen. It looks like this machine and it is listed next to it, but the panel is not the same one. This store already carries the ANV15-51 entries separately; if your machine is the Intel version, order that listing instead of this one |
| NOT an upgrade from a slower screen | This is not an upgrade path from a slower screen. Going from 144 Hz to 165 Hz on one of these machines is not a straight swap: the refresh rate is tied to the panel the machine shipped with and to the display tuning the manufacturer qualified for it, and suppliers who sell these panels say outright that a refresh-rate change needs the exact panel code checked first. If you want a different rate than the machine was built with, send us the code on the back of your screen and we will tell you honestly whether it can be done |
| Condition | Brand-new, unassembled |
| Quality | iProGadgets OEM Quality |
Compatibility
| Device | Model numbers / part codes |
|---|---|
| Machine coverage — confirmed | For Acer Nitro V 15 ANV15-41, 165 Hz non-touch build, including ANV15-41-R1P5 and ANV15-41-R1KX. The AMD build is identified by its USB4 port and by the ANV15-41 prefix; the Intel build is the ANV15-51 and takes the 144 Hz screen |
| Machine coverage — other builds | Every configuration of the Acer Nitro V 15 ANV15-41 with the 165 Hz screen, across the Ryzen 5 7535HS, Ryzen 7 7735HS and Ryzen 5 6600H builds and the RTX 3050, RTX 4050 and RTX 4060 graphics options — the configurations sold as ANV15-41-R1P5 and ANV15-41-R1KX among them. The screen does not change with the processor or the graphics card. What does matter is the refresh rate: the 144 Hz configurations of this same model take a different panel, and the Intel ANV15-51 is a different machine with a 144 Hz screen |
| Panel codes covered | Send us the code from the panel you are removing and we will match it rather than guess |
| NOT the 144 Hz builds | The same chassis, the same 15.6 inch size, the same 1920 x 1080 resolution and the same 40-pin plug were also sold at 144 Hz, and that is a different panel. The ANV15-51 (the Intel build of this machine) is 144 Hz, and the ANV15-41 exists in both rates. A 144 Hz panel and a 165 Hz panel are not interchangeable in either direction — the machine's own display tuning and cable are built for the panel that shipped in it. Check the rate before you order: Settings, System, Display, Advanced display, and read the refresh rate. If it says 144 Hz, this is not your part |
| NOT the Intel Nitro V 15 (ANV15-51) | The ANV15-51 is the Intel build sold under the same "Nitro V 15" name — 13th-gen Core, Thunderbolt 4 rather than USB4, and a 144 Hz, 250 nit screen. It looks like this machine and it is listed next to it, but the panel is not the same one. This store already carries the ANV15-51 entries separately; if your machine is the Intel version, order that listing instead of this one |
Before We Ship — Please Send Us These 3 Details
This laptop was sold with more than one screen, and the model name on the lid does not say which one is inside: the Nitro V 15 came as the ANV15-51 at 144 Hz, the ANV15-41 at either 144 Hz or 165 Hz, and the ANV15-52 at 165 Hz or 180 Hz — all of them the same 15.6 inch size, the same 1920 x 1080 resolution and the same 40-pin plug. Size and connector will not tell us apart, so the listing alone cannot always tell us what to send. After you place the order we will contact you for the three items below — please send them so we can confirm the fitment and dispatch the correct screen straight away:
- The refresh rate your machine runs today. In Windows: Settings, System, Display, Advanced display. This is the single most important detail on this listing — if it reads 144 Hz rather than 165 Hz, this is not your panel and we will quote the right one.
- A photo of the underside label. The sticker on the base of the laptop carries the SKU code, such as ANV15-41-R1P5 or ANV15-41-R1KX, plus the serial. That code identifies the configuration, and it is how we tell the AMD ANV15-41 build from the Intel ANV15-51 build that shares the same "Nitro V 15" name.
- Photos of the old screen. A full photo of the back of the panel you are removing and a close-up of the label on it. That label carries the panel code, and it settles which screen you need far more reliably than the model of the laptop does.
We check your photos against our stock before dispatch. If something does not match, we will contact you first instead of sending a part that may not fit. Once your details are confirmed, we arrange shipment within 1 to 3 business days. Thank you for helping us get it right.
Installation Notes
- Unplug the power cord and disconnect the battery before you start. On a gaming laptop the panel connector carries 3.3 V and the backlight rail sits higher; neither is designed to be mated or unmated with the board energised.
- Hold the power button for a few seconds after disconnecting, so the board discharges.
- The bezel comes off first and the panel is held by it and by adhesive — there are no side brackets and no screw tabs on this slim build. Work slowly, warm the adhesive evenly, and use a suction cup on the panel rather than prying at its edge. A flexed panel cracks long before it bends.
- One plug has to be released: the 40-pin eDP connector on the bottom right as you look at the back of the panel. Release the latch before pulling, and never pull on the cable itself.
- Clean the flex cable with alcohol before installation and confirm that it is fully seated and latched.
- Do not pull, tear or push on the flex cable, be careful during installation.
- Handle the panel by its short edges only, and never flex the long edge where the driver strip is bonded.
- Test the panel on the connector before you refit the bezel, and keep the protective film on until it works. Check the refresh rate afterwards in Advanced display — a 165 Hz panel fitted to a machine that was built for 144 Hz will not run at 165 Hz.
- Please tap the screen carefully, because the screen is too fragile to damage.
Quality Control
Strictly tested by the iProGadgets QC Team — every unit is double tested before shipping and ships in good working order, including a display check at full resolution and at the full refresh rate. After receiving the part, please check the appearance and test it first: connect the part to the machine for a functional test before full installation, and only reassemble once everything works. We are not responsible for any installation mistakes — if you are not experienced with laptop screen replacement, have the part fitted by a professional repair shop.
Shipping
We ship worldwide. Orders are dispatched within 1 to 3 business days, and every package carries a tracking number you can follow on the order page. Delivery typically takes 7 to 10 days after dispatch.
Returns & Warranty
30-day returns on unused, uninstalled parts. The warranty is valid until installed — once a screen has been fitted, the return window no longer applies, which is why we ask you to test before installation.
FAQs
My Nitro V 15 runs at 144 Hz — is this the right panel?
No, and this is the single most common wrong order on this machine, so it is worth thirty seconds before you buy. The Nitro V 15 came in three generations and the refresh rate is not the same across them: the ANV15-51 is 144 Hz, the ANV15-41 was sold at both 144 Hz and 165 Hz, and the ANV15-52 at 165 Hz or 180 Hz. All of them are 15.6 inch 1920 x 1080 IPS panels on a 40-pin plug, so size, resolution and connector will not tell you which one you are holding — only the rate will. In Windows go to Settings, System, Display, Advanced display and read the refresh rate. If it reads 144 Hz, do not order this listing: send us the SKU code from the underside of the laptop and a photo of the label on the back of the screen, and we will quote the 144 Hz panel instead.
How do I check that this is the screen I need?
Three things, in order, and none of them needs tools. First, read the refresh rate the machine runs today: Settings, System, Display, Advanced display. If it says 144 Hz rather than 165 Hz, this is not your part. Second, read the SKU code on the underside label of the laptop — the ANV15-41 codes in this listing end R1P5 and R1KX, and the Intel ANV15-51 build is a different machine with a different screen. Third, open the machine far enough to see the back of the panel and read its label: the screen you are removing should be 15.6 inch, 1920 x 1080, 165 Hz, matte anti-glare with no touch layer, on a 40-pin eDP plug, Send us a photo of that label and of the underside sticker and we will match it before dispatch instead of shipping a screen that may not fit.
Can I fit this panel to a machine that has a touchscreen?
No. No Nitro V 15 was offered with a touchscreen — the whole line is 1080p non-touch, and there is no 1440p and no OLED option on any of them either. This panel has no touch layer and no touch connector, so a touch machine would be left with a touch lead and nothing to connect it to, and no touch function. If the screen you are removing responds to your finger, you are not holding a Nitro V 15 panel at all: send us a photo of the label on the back of the display and the model from the underside of the laptop, and we will identify what you actually have before you spend money on the wrong part.
Questions about fit, shipping to your country, or bulk pricing? Email sales@iProGadget.com and we will confirm the exact part you need.
Frequently Asked Questions
Is this part compatible with my device?
This listing is for For Acer Nitro V 15 ANV15-41 ANV15-41-R1P5 ANV15-41-R1KX 15.6 inch FHD 165Hz LCD Panel. It is built as a direct-fit replacement for the model named in the title. Match the model number in the title against your own device before ordering. If you are not sure which version you need, email sales@iProGadget.com and we will confirm the correct part for you.
What is the quality of these replacement parts?
We supply iProGadgets OEM Quality / Premium Compatible replacement parts. Every part is manufactured to OEM specifications, so the fit, finish and function match the original component it replaces, and each unit is individually tested before it leaves our warehouse.
Is the part tested before it is shipped?
Yes. Every part we sell is inspected before dispatch and tested wherever testing applies — screen assemblies are checked on the panel, the touch response and the connector. Orders are processed and shipped within 1-3 business days after payment is confirmed.
How long does shipping take?
Orders leave our warehouse within 1-3 business days. Express Shipping (DHL, UPS or FedEx) takes 5-8 working days and is normally used for parcels over 2 kg. Registered Air Post takes 10-20 working days and is normally used for parcels under 2 kg. Every order ships with a tracking number. Customs clearance can add extra time, especially during peak season.
Will I be charged import duties or customs fees?
Customs charges depend on your own country's import rules and its de minimis threshold, not on the seller. Some destinations apply no duty at all on lower-value parcels, and where duty or VAT does apply it is collected by your local post office or courier before delivery. We ship every order with complete and accurate commercial documents, which is what keeps a parcel moving through customs instead of sitting in it. If you would like to estimate the charges before you order, email us your country and we will point you to the right authority.
What is your return policy?
We offer a 30-day return policy, which means you can request a return within 30 days of receiving your item. To be eligible, the item must be unused, uninstalled and in the packaging it arrived in. Once a part has been fitted, bonded or used it cannot be returned, so please test the part before installation. To start a return, email sales@iProGadget.com.
What should I do if the part arrives damaged or faulty?
Inspect your order as soon as it arrives. If an item is defective, damaged or not what you ordered, contact us at sales@iProGadget.com straight away with photos or a short unboxing video, and we will arrange a replacement or a refund.
Do you provide repair guides or installation tutorials?
No. We are a supplier of replacement parts only. We are not a repair shop, and we do not provide repair guides, tutorials or step-by-step installation support. Every part we sell is intended to be installed by a professional technician at a qualified repair shop, which also gives the best result: a technician can transfer the small components, handle the adhesives and test the finished repair. Please do not attempt the installation yourself if you have no previous repair experience, as these assemblies are fragile and incorrect handling can damage them permanently. We sell parts only and do not accept responsibility for installation carried out by the customer. Our warranty covers the part itself and remains valid until the part is installed. If a problem appears after the repair, please take the device back to the repair shop that fitted the part so they can inspect the installation and test the device.
Still have a question about this part? Email us at sales@iProGadget.com and we will confirm compatibility, shipping time or return details for you.
